Key Features
Covers Micro Four Thirds/APS-C Sensors
Suitable for 4K Image Capture
2.4:1 De-Squeezed Format; 8-Blade Iris
Schott Optical Glass with Nano Coatings
Blue Streak Effects; Less Stray Light
Just under 2' Minimum Focus
Focus Scales in Feet & Meters
72mm Filter Thread
This 24mm f/2.8 Anamorphic 1.33x Lens from Sirui, in a Fujifilm X mount, brings a wide-angle feel to your anamorphic imagery, in addition to the extra width provided by the anamorphic process. Designed for MFT/APS-C cameras with a Fujifilm X mount, the lens increases the horizontal FOV by 33% compared with traditional 24mm APS-C lenses. After de-squeezing, the captured image is displayed in a 2.4:1 format in a 16:9 setting. Lightweight and portable, the f/2.8 lens is designed with an aluminum housing and features optics with multilayer nano coatings.

Made with renowned Schott optical glass lens elements, it produces rectangular aspect ratios, long horizontal lens flares, and oval bokeh. One of the exciting features of this lens is the close focus distance of just under 2', allowing you to get close focus for creative effects. Focus scales marked in both feet and meters makes this well suited for users around the world, and the 72mm filter thread is a popular filter size for adding filters to your lens.

Features
A robust lens with advanced optics for compact MFT/APS-C cameras
33% horizontal field of view increase over standard 24mm lenses
Anamorphic 2.4:1 de-squeezed format in 16:9
Multi nano-coated Schott optical glass
Horizontal blue streak effects
8 aperture blades produce oval bokeh
1.97' minimum focusing distance
Focus scales in feet and meters
72mm filter thread
Durable lens housing

Key Features
Robust Aluminum Lens for APS-C Cameras
2.4:1 De-Squeezed Format; 10-Blade Iris
Schott Glass with Nano Coatings
Horizontal Blue Streaks/Less Stray Light
The Sirui 50mm f/1.8 Anamorphic 1.33x Lens, with an X-mount, is designed for APS-C cameras and increases the horizontal FOV by 33% in comparison with traditional 50mm APS-C lenses. The result is equivalent to a wider, 37.5mm APS-C lens. After a de-squeeze, the captured image is displayed in an anamorphic 2.4:1 format in a 16:9 setting. This fast f/1.8 lens is designed with an aluminum housing and features optics with multilayer Nano coatings. It has renowned Schott optical glass lens elements and delivers rectangular aspect ratios, long horizontal lens flares, and oval bokeh.

One of the features of this lens is that it produces horizontal blue streaks with less stray light, which Sirui calls sci-fi horizontal flares. A key aspect of anamorphic lenses is highlighted oval bokeh, and this lens achieves a shallow depth of field and oval bokeh with its 10 aperture blades. While the lens has a robust housing, it's also designed to be lightweight for use with your compact APS-C camera.

Key Features
Robust lens with advanced optics for compact APS-C cameras
33% horizontal field of view increase over standard 50mm APS-C lenses
Anamorphic 2.4:1 format in a 16:9 setting after de-squeeze
Aluminum housing
Schott optical glass
Multilayer Nano coatings
Horizontal blue streaks with less stray light
10 aperture blades
2.8' minimum focusing distance
67mm filter thread
Magnification: 1:15.38 (V), 1:20.17 (H)

Key Features
Formfitting Aluminum Camera Cage
Does Not Restrict Camera Access
1/4"-20 and 3/8"-16 Threads
1/4"-20 Camera Screw and Anti-Twist Pins
Add a whole range of accessories to your video rig with this Camera Cage for FUJIFILM GFX 100S / GFX 50SII from Leofoto. Precisely cut from solid blocks of aluminum, this cage features multiple 1/4"-20 and 3/8"-16 threads for integrating microphones, handles, and more to your setup. This provides great flexibility for your FUJIFILM GFX 100S or 50SII, which securely attaches to the cage via a 1/4"-20 screw and locking corners to prevent twisting. A handy magnetic Allen key is included for easy adjustment of your camera add-ons.

Key Features
Formfitting Aluminum Camera Cage
Does Not Restrict Camera Access
1/4"-20 and 3/8"-16 Threads
1/4"-20 Camera Screw and Anti-Twist Pins
Add a whole range of accessories to your video rig with this Camera Cage for FUJIFILM X-H2 from Leofoto. Precisely cut from solid blocks of aluminum, this cage features multiple 1/4"-20 and 3/8"-16 threads for integrating microphones, handles, and more to your setup. This provides great flexibility for your FUJIFILM X-H2, which securely attaches to the cage via a 1/4"-20 screw and locking corners to prevent twisting. A handy magnetic Allen key is included for easy adjustment of your camera add-ons.

Form fitting design
Designed specifically for the Fujifilm X-H2/X-H2s
Lightweight aircraft grade aluminium
Removable top handle
Multiple mounting points for accessories
Arca standard bottom rail
Alternative quick release plate for use on a gimbal or tripod head
Wrist strap
This full cage is specifically designed for the Fujifilm X-H2/X-H2S. It adds a lot of mounting points without getting in the way of the camera’s controls. Cameras are attached to the cage via 2 points for added stability and rubber pads are included to keep the camera free from scratches and damage.

A variety of accessories can be attached to the camera via 1/4-20″ threaded holes, ARRI 3/8″-16 locating holes, cold shoe mounts, NATO rails, quick release plates, etc. Two types of quick release plates are included for quick switching between handheld, tripod, and gimbal modes.​ The ergonomic wrist strap takes a lot of pressure off your hand whether shooting horizontally or vertically, and provides more stability for the user.​ The Cage weighs only 370g (with handle) so even with a lot of accessories attached, the whole setup remains portable for handheld shooting.

Magnetic tools including a flathead screwdriver and an M2 hex key are stored at the bottom. The handle comes with three cold shoe mounts and has an Allen key built into it. Safety pins help lock the handle securely to the cage

Compatibility:

Fujifilm X-H2

Fujifilm X-H2s

Precision Engineered for Fujifilm X-H2 & X-H2s
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss & RRS Clamps
Weight: 125g. Height 90mm. Length 143mm. Width 62mm.

Printing method
Dye-sublimation thermal transfer (D2T2)

Foot print
0.10 m2

Line-up of consumables*1
Standard Print : 5”×7”, 6”×8”
Sticker Print : 6”×8”

Print size*2
Standard Print : 3.5”×5”,5”×5”, 5”×7”, 4”×6”, 6”×6”, 6”×8”
Sticker Print : 4”×6”, 6”×8”

Surface finish*3
Glossy type, Matte type

Ribbon finish
Yellow, Magenta, Cyan and Overcoat

Printing resolution*4
300×300 dpi (Standard mode),
300×600 dpi (High Quality mode)

Operation for paper exchange
Semi-Auto Loading

Printer life
200,000 prints (Standard 4”×6”)

Number of prints
Standard 3.5”×5”: 460 sheets, 5”×7”: 230 sheets in 1 roll
Standard 4”×6”: 400 sheets, 6”×8”: 200 sheets in 1 roll
Sticker 4”×6”: 400 sheets, 6”×8”: 200 sheets in 1 roll

Print speed*5
Standard 3.5”×5” : approx. 7.6 sec (Glossy type, Standard mode)
Standard 4”×6” : approx. 8.4 sec (Glossy type, Standard mode)
Sticker 4”×6”: approx. 13.0 sec (Glossy type, High Quality mode)

Dimensions (W×D×H)
10.8”×14.4”×6.7” (275 mm×366 mm×170 mm)

Weight
approx. 12 kg (26.4 lb)

Interface
USB 2.0 Type B connector

Power supply
100V-240V 50 / 60 Hz

Driver software*6
Windows 7 / Windows 10 (32 bit / 64 bit)

*1 printer memorizes the consumable type (sticker or standard) which is first loaded into the printer and then the printer accepts only the same type of consumables.
*2 Sticker/Standard can uses 6”×8” ribbon and divide it to 4”×6”×2 prints. Standard can uses 5”×7” ribbon and divide it to 3.5”×5”×2 prints.
*3 Both are available with one media. Sticker media is limited to Glossy type.
*4 Stickers can be printed in High Quality mode only.
*5 Does not including data processing/transferring time and paper initialization/paper feed times. In case of using the function of ribbon rewind.
*6 Windows 7 is only guaranteed to work(not be subject to future version upgrades or quality assurance) because Windows7 is not supported by Microsoft Corporation. Windows 7, Windows 10 are registered trademarks of Microsoft Corporation in the United States and other countries.

Key Features
For NP-T125 Lithium-Ion Battery
Dedicated to the FUJIFILM NP-T125 rechargeable lithium-ion battery, the BC-T125 Battery Charger is a spare or replacement item for the one originally included with the GFX 50S medium format mirrorless camera.

Key Features
For NP-W126S Battery
LED Indicator
This BC-W126S Battery Charger from FUJIFILM is designed to charge NP-W126S lithium-ion batteries. The LED indicator illuminates during the charging cycle and turns off when charge is complete.

Key Features
Simultaneous Charging of 2 x NP-W235
Charging Status Backlit Display
Up your charging efficiency with this FUJIFILM BC-W235 Dual Battery Charger, which is capable of charging two NP-W235 batteries at once. An integrated backlit screen also displays the charging status for both batteries.