The Leofoto LX Series tripods are built to be lightweight, compact and perfect for travel. The LX tripods feature a reversible center column, perfect for those ground level shots or use the included short center column to set the tripod low to the ground. The rubber leg wrap offers the perfect grip for the traveler that is on the go. The center column mounting stud is reversible and can swap between a 1/4" or 3/8" mounting stud.

x10 layer Toray carbon fiber leg tubes
Hard anodized aluminum hardware
Unique 3 angle stop system
Twist leg locks
Reversible center column
Short center column
Reversible 1/4" to 3/8" mounting stud
Included: Leofoto tripod case
The Leofoto XB-32Q Ball Head with NP-35 Quick Release Plate is designed to be used with the Leofoto LX Urban Series tripods but can be mounted to any tripod with a 3/8" mounting stud. The XB Series ball heads feature a panning lock knob and a large ball locking knob with tension control on the inner knob. The laser engraved graduated scale provides precise centering and positioning. The XB Series ball heads are ideal for travelers and those on the go.

Leofoto LX-224CT + XB-32Q:

Max. Height with center column fully extended: 1300mm/ 51.18in
Max. Height with center column retracted: 1100mm/ 43.30in
Min. Height: 200mm/ 7.87in
Folded length: 370mm/ 14.56in
Leg Section: 4
Max load: 8kg/ 17.63lb
Weight: 1.12kg/ 2.47lb
Leg tubes: 22/19/16/13mm

Brand LEOFOTO
Compatible Devices Camera, IPhone
Material Aluminum
Item Weight 233 Grams
Maximum Height 16.1 Centimeters
Tripod Head Type Ball Heads
Minimum Height 77 Millimeters
About this item
Folded height: 191mm Min height: 77mm Weight: 233g Max load when fully open: 5kg Locked Angles : 35° / 55° / 85°

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The black Sirui 3T-35K Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The red Sirui 3T-35R Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Brand Sirui
Color Black
Compatible Devices Still Camera and Camcorder
Material Carbon Fiber
Item Weight 1.62 Pounds
Weight Limit 22 Pounds
Model Name AM-223+B-00K
Maximum Height 13.8 Inches
Tripod Head Type Ball Heads
Minimum Height 2.3 Inches
Compact Tripod: Material: carbon fiber; Color: Black; Weight: 1.17lbs (tripod) + 0.45lbs (ball head); Sections: 3; Min Tube: 16mm/0.63"; Max Tube: 22mm/0.87"; Min Height: 58mm/2.3"; Max Height: 350mm/13.8"; Retracted Height: 215mm/8.5"; Max Load( tripod) : 33lbs/15KG; Max Load( ball head) : 22lbs/10KG.
Functional characteristics: easy adjustment: 3-section column legs with twist leg locks enables you to adjust the working height from 2. 3" To 13. 8" Instantly; loosen and remove the rubber feet, and replace them with the stainless steel spikes
Material characteristics: The whole set weights only 1. 62 lbs. , So it is easy to carry everywhere and suitable for shooting insects and plants. Except for its lightweight and portability, there are other characteristics of excellent durability and high temperature resistance; It also have outstanding stability, flexibility and load capacity. Minimum tube Diameter is 0. 63", but it is able to bear heavy photographic equipment's
Excellent process: The mounting screw is interchangeable from 3/8" To 1/4"
What You Get: 1 x SIRUI AM-223 Mini Tripod; 1 x B-00K Ball Head; 3 x Stainless Steel Spikes; 2 x Allen Wrench; 1 x Portable Bag; 6 years warranty and prompt customer service.

Key Features
Knobs for Pan, Tilt & Tension
55 lb Load Capacity
Quick Release Plate
Arca-Type Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-type clamp for the included quick release plate. The pan, tilt, and quick release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation.

The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-type platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-type quick release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
66 lb Load Capacity
QR Plate with Anti-Twist Rubber Mat
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-30x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation, and the quick-release plate has a rubberized surface that prevents camera twist when it's tilted 90°.

The interior ball locking of the K-30x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 66 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-30x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
77 lb Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-40X Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation. There's also a video pin on the plate to keep camcorders from twisting.

The interior ball locking of the K-40X head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 77 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security and stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-40X is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Sirui ST-224 Waterproof Carbon Fiber Tripod with ST-20 Ball Head

Load Capacity: 15kg
Leg Sections: 4
Weight: 1.9kg
Ultra Low profile design
Triangle Center Column
Integrated Stainless Steel Spikes and Rubber Feet
ST-20 Ball Head

Knobs for Pan, Tilt & Tension
Panning clamp
550 grams
Aluminium knobs for added durability
35 kg Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui ST-224 Waterproof Carbon Fibre Tripod with ST-20 Ball Head is protected from water, dirt and dust. In addition, it has a newly designed locking mechanism for comfortable operation and a spirit level for accurate alignment. The tripod tubes are manufactured from 8-layer carbon fibre (reduced weight, increased stability, vibration-free). The centre column is made in a triangle shape to enhance rigidity and also allows for the profile of the tripod to be extremely low profile when folded. The legs have three ratchet positions to allow for different angles and extension. The tripod measures just 48cm when collapsed. Each leg is made of 4 sections with 3 sealed twist locks. Rubber feet and metal spikes ensure that the tripod is stable on any surface.

A stabilising hook on the centre column is a SIRUI standard and a transport bag. The bag strap can also be used as a tripod strap.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.9kg
– Max. load: 15kg
– Tripod height: 520mm – 1840mm
– Closed size: 610mm

Included
1x SIRUI ST-224 waterproof tripod carbon fibre
1x ST-20 Ball head with QR plate
1x Transport bag with strap



The Sirui ST-20 Ball Head are designed and built to the highest standards. The ST-20 ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 40mm
– Weight: 0.55kg
– Height: 90mm
– Load Capacity: 35kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Perfect Travel Tripod
Reverse-Folding Legs
Removable Center Column for Low-Angles
Arca-Type Compatible QR Plate
Includes Soft Case and Tools
Weighs only 1kg
The Sirui Traveler 5A Aluminium Tripod with 3T-35 Ball Head – small and compact, yet extremely stable.

This high-quality travel tripod from SIRUI offer secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and can be packed into any bag. The legs can be folded up by 180° meaning that the tripod can be collapsed to a height of just 33cm. Each leg is made of 5 sections with 4 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces. Cold-weather grips are a SIRUI standard offering control in cold weather environments. The Traveler 5 Series features a removable centre column. The head can also be mounted directly onto the tripod shoulder, increasing stability. For additional stability, there is a small keyring with a carabiner underneath the tripod shoulders so you can mount additional weight.

Tripod specifications (Including Head)
• Material: Aluminium
• Extendible and removable centre column
• Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
• Legs fold up by 180°
• Sealed twist locks for secure support
• Carabiner for stabilising and cold weather grips
• Max. load: 4kg
• Height range – 15.5cm – 138cm
• Closed size: 33cm
• Tube diameter: 10 – 22mm
• Weight: 1kg
– Colour: black

Ball head specifications
– Material: Aluminium
– 360° panorama function – infinitely variable friction control
– Rubber release plate – size: 30x38mm
– Release plate with 1/4″ stainless steel screw – head with 3/8″ thread
– Safety Lock System – prevents the plate from accidentally slipping
– Vertical slot
– Max. load: 4kg
– Height: 70mm
– Base plate: ø37mm
– Weight: 172g (including plate)
– Colour: black

Included
1x SIRUI Traveler 5A tripod aluminium black
1x SIRUI 3T-35K ball head black
1x SIRUI TY-C10 release plate black
1x Transport case

Shoulderless: With a reverse leg fold-up, easily backpack the 12.4 inches/315mm compact fit and carry less at a weight approximate to 1.58lbs/0.72kg(without head).

Multiple Working Height: Remove the center column for low angle and macro shots. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights.

Easy Leg Adjustments: Adjust the legs to your desired angle by pulling out the semi-automatic leg angle adjustment button. Easily set up the legs with a quick turn twist of the leg locks.

Shoot Beyond Your View: Smoothly pan the head 360° to capture a beautiful landscape panorama shot.
SIRUI Compact Traveler Tripod 5CX
MATERIAL: CARBON FIBER
Sections: 5
Max. Tube Diameter(mm/inch): 22/0.87
Min. Tube Diameter(mm/inch): 10/0.39
Min. Height(mm/inch): 90/3.54
Max. Height(mm/inch): 1320/51.97
Retracted Height(mm/inch): 535/21.1
Folded Height(mm/inch): 315/12.4
Weight(kg/lbs): 0.85/1.87
Max. Load(kg/lbs): 4/8.8
Ball Head Specification:
Diameter(mm/inch): 29/1.15
Height(mm/inch): 70/2.76
Weight(kg/lbs): 0.21/0.45
Max. Load(kg/lbs): 10/22

Dedicated to the FUJIFILM X-W235 mirrorless cameras, the NP-W235 Rechargeable Lithium-Ion Battery is a spare or replacement item for the one originally included with the camera. The battery is compatible with the dedicated Twin Battery Charger or can be charged in-camera.

The Quick strap F-1 will keep your gear safe and steady in even the most strenuous situations
Product Dimensions: 35.6 x 2.5 x 10.2 cm
Compatible For SLR, DSLR Camera

Key Features
Hybrid Digital/Instant Film Camera
Accepts INSTAX Mini Instant Film
Produces Credit Card-Sized Prints
1/5" CMOS Sensor, 2560x1920 Resolution
Fixed 28mm f/2 Lens (35mm Equivalent)
2.7" 230k-Dot LCD Monitor
Bluetooth for Smartphone Operation
App for Printing & Adding Filters/Frames
Integrated Flash & Selfie Mirror
Audio Recording with QR Code Playback
Bringing hybrid capabilities to the Mini Series, the stone white FUJIFILM INSTAX Mini LiPlay is a sleek camera offering a true mixture of digital and film. As a hybrid instant camera, the Mini LiPlay records digitally but can output photos on INSTAX Mini film. Also, by recording digitally, you can print whichever images you want, whenever you want, and as many times as you want. This digital shooting workflow also enables Bluetooth connectivity for smartphone-based control over the camera, along with the ability to print photos from your phone or apply filters and frames to your shots when printing. Also unique to the Mini LiPlay, a dedicated sound recording button is featured, which allows you to record audio and "attach" it to your prints through the use of a QR code, which can be scanned to hear the sounds while viewing. Beyond the hybrid capture-to-print technology, this camera is also characterized by its especially compact and stylish design, along with a fixed wide-angle lens, built-in flash, integrated selfie mirror, and a rear LCD monitor for image composition and printing setup.

Camera Design
Hybrid instant camera combines convenient digital image capture with traditional instant film output. This method allows you to shoot freely and print whenever desired or reprint an image as many times as desired.
Accepts INSTAX Mini instant film to produce 2.4 x 1.8" images on a credit card-sized, 3.4 x 2.1" sheet.
Fixed 28mm-equivalent lens offers a versatile wide-angle perspective and the f/2 aperture is well-suited for working in a variety of lighting conditions. The lens also has a 3.9" minimum focusing distance for working with close-up subjects.
Rear 2.7" 230k-dot LCD monitor is used for composing imagery as well as reviewing photos and navigating the printing menu.
Small selfie mirror is built into the front of the lens design for accurately composing self-portraits.
Compact design is easy to handle, and the body incorporates a large shutter release button on the front of the camera.
Built-in flash provides additional illumination when working in low-light conditions. This light is also used to indicate the self-timer countdown.
Built-in rechargeable lithium-ion battery is used to power the camera and supports printing up to approximately 100 images per charge. It can be charged via USB in approximately 2-3 hours.
Internal memory holds approximately 45 still images and a microSD/SDHC memory card slot can be used to expand storage capacity.
Reprints are possible from the camera's internal memory, the memory card, or from a smartphone's image library.
Bluetooth Connectivity
Bluetooth connectivity allows a smartphone to pair with the camera for remote shooting control as well as wireless printing of images from the smartphone.
Dedicated smartphone app allows you to preview images before printing as well as add colorful frames and filters.
Three shortcut buttons can be used to assign frames for printing, and these can be configured using the smartphone app.
The camera has a dedicated sound recording button, and audio can be recorded in conjunction with each exposure. This audio is associated to a unique QR code on the print, and audio playback is possible by reading the QR code with a smartphone.

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-C Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon, FUJIFILM, Nikon, and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS M6
EOS 6D
EOS 5D Mark IV
EOS 5D Mark III
EOS 5D Mark II
EOS 5Ds
EOS 5Dsr
Rebel XT1 / 400D

FUJIFILM:
GFX 100S
GFX 50R
GFX 50S II
GFX 50 S
X-T30 II
X-Pro3
X-T3

NIKON:
Df
D750
D780
D850
D810
D810A
D800
D610
D500
D7500
D7200
D5600
D5300
D3500

SONY:
a7
a7R

Special effects cinema filter designed to render a single light ray from a point light source
Creates the effect of elongated blue streaks horizontally from the light source
The filter can be rotated to adjust the orientation of the light streak
Rotating front to change the angle of the streak
Optical Glass
The NiSi Cinema Rotating 82mm Allure Streak BLUE (2mm) is a special effects filter designed to render a single light ray from a point light source. This filter features a single series of etched lines spaced 2mm apart from each other, which run across the filter surface. The filter creates the effect of elongated blue streaks horizontally from the light source usually seen when using an Anamorphic type of lens. The 82mm filter has a rotating front (similar to how a CPL rotates) and when the filter is rotated, the orientation of the light ray can be adjusted to suit your composition or desired effect. The filter is constructed from clear optical-grade glass H-K9L for maintained image clarity and an aluminum frame.

We recommend focal lengths of 35mm and longer with our streak range to ensure a straight steak from the light source free from lens deformation.

Etched lines spaced 2mm apart produce a horizontal single ray of light from point light sources, strong highlights, reflective materials, or metallic surfaces.
The filter can be rotated to adjust the orientation of the light streak.
Optical glass construction maintains the original image quality and does not affect the overall color or contrast

For imagePROGRAF iPF6300, iPF6300S, iPF6350, iPF6400, iPF6400S, iPF6400SE, iPF6450, iPF8300, iPF8300S, iPF8400, iPF8400S, iPF8400SE, iPF9400, and iPF9400S Large-Format Printers
Refresh your large-format imagePROGRAF printer with this replacement PF-05 Print Head from Canon. This item will ensure that your printer is at peak performance and will help produce crisp, clean imagery.