Key Features
For NP-W126S Battery
LED Indicator
This BC-W126S Battery Charger from FUJIFILM is designed to charge NP-W126S lithium-ion batteries. The LED indicator illuminates during the charging cycle and turns off when charge is complete.

Key Features
For Select X-Series and FinePix Cameras
Improved Heat Management For using the maximum power of your mirrorless camera, the FUJIFILM NP-W126S Li-Ion Battery Pack has been designed to better manage heat and ensure lightning fast camera performance. This battery is also compatible with older cameras that use the NP-W126 battery pack, but users will not see any performance advantages in those bodies.

Key Features
For FUJIFILM X-T4 Camera
Spare or Replacement Item
Dedicated to the FUJIFILM X-T4 mirrorless camera, the NP-W235 Rechargeable Lithium-Ion Battery is a spare or replacement item for the one originally included with the camera. The battery is compatible with the dedicated Twin Battery Charger or can be charged in-camera.

Key Features
Simultaneous Charging of 2 x NP-W235
Charging Status Backlit Display
Up your charging efficiency with this FUJIFILM BC-W235 Dual Battery Charger, which is capable of charging two NP-W235 batteries at once. An integrated backlit screen also displays the charging status for both batteries.

Fits 1/4" Accessory Socket on most Leofoto Tripods
Rock Solid Support
Max Load 1.5KG (3lbs)
Length 112mm. Weight 53.2g
Includes Allen Wrench

Fits 1/4" Accessory Socket on most Leofoto Tripods
►Rock Solid Support
►Max Load 1.5KG (3lbs)
►Length 192mm. Weight 98g
►Includes Allen Wrench

About this item
Leofoto DY-01 Mini Foldable Skater Video Dolly Panning 360/ 1/4“ Screw
Length: 128mm Width：84mm Weight: 64g
Mounted on the video dolly, the camera can pan 360°around the subject without rails.The rear wheels of the dolly are fixed.The round plate is with a clear scale of ±50°,and every 10°is a gear position.The dolly can move straight freely or be on a maximum of 50° left or right for directional movement,which makes video shooting more vivid.Cameras,ballheads,phone clamps etc can be mounted or the dolly via the 1/4"screw in the middle.All the wheels are wrapped with rubber to avoid noise and move smoothly.

Key Features
1/4" Male Mounting Stud
CNC-Machined 6061-T6 Aluminum
Offers Extra Mounting Options
For cameras Hot/Cold Shoes
This FA-01 Hot Shoe Adapter from Leofoto offers extra mounting options on your Canon or Nikon's hot or cold shoe.

Key Features
3/8" Male Mounting Stud
1/4" Female Thread within Stud
CNC-Machined 6061-T6 Aluminum
Offers Extra Mounting Options
This FA-02 Hot Shoe Adapter from Leofoto offers extra mounting options on your camera

Key Features
Formfitting Aluminum Camera Cage
Does Not Restrict Camera Access
1/4"-20 and 3/8"-16 Threads
1/4"-20 Camera Screw and Anti-Twist Pins
Add a whole range of accessories to your video rig with this Camera Cage for FUJIFILM GFX 100S / GFX 50SII from Leofoto. Precisely cut from solid blocks of aluminum, this cage features multiple 1/4"-20 and 3/8"-16 threads for integrating microphones, handles, and more to your setup. This provides great flexibility for your FUJIFILM GFX 100S or 50SII, which securely attaches to the cage via a 1/4"-20 screw and locking corners to prevent twisting. A handy magnetic Allen key is included for easy adjustment of your camera add-ons.

The Leofoto LPF-GFX100S L-Bracket for FUJIFILM GFX 100S/GFX 50SII Cameras is designed with anti-twist flanges that prevent the camera from moving within the bracket. Its Arca-type compatible dovetail design enables the camera to mount in a vertical or horizontal position when shooting with compatible tripod head.
Precision Engineered for Fujifilm GFX 100S and GFX 50SII
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss
Weight: 100g/ 0.22lb
Height 93mm/ 3.66"
Length 120mm/ 4.27"
Width 43mm/ 1.69"

Precision Engineered for Fujifilm X-H2 & X-H2s
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum.
Fully Compatible with Arca-Swiss & RRS Clamps
Weight: 125g. Height 90mm. Length 143mm. Width 62mm.

The Leofoto LPFO-X-T5 L Plate for Fujifilm X-T5 is designed with anti-twist flanges that prevent the camera from moving within the bracket. Its Arca-type compatible dovetail design enables the camera to mount in a vertical or horizontal position when shooting with compatible tripod head.
Precision Engineered for Fujifilm X-T5
Full Access to Ports, Cards, and Battery
Precision CNC Machined from Solid Aircraft-Grade Aluminum
Fully Compatible with Arca-Swiss
Weight: 125g/ 0.27lb
Height 84mm/ 3.3in
Length 140mm/ 5.51in
Width 58mm/ 2.28in

Form fitting design
Designed specifically for the Fujifilm X-H2/X-H2s
Lightweight aircraft grade aluminium
Removable top handle
Multiple mounting points for accessories
Arca standard bottom rail
Alternative quick release plate for use on a gimbal or tripod head
Wrist strap
This full cage is specifically designed for the Fujifilm X-H2/X-H2S. It adds a lot of mounting points without getting in the way of the camera’s controls. Cameras are attached to the cage via 2 points for added stability and rubber pads are included to keep the camera free from scratches and damage.

A variety of accessories can be attached to the camera via 1/4-20″ threaded holes, ARRI 3/8″-16 locating holes, cold shoe mounts, NATO rails, quick release plates, etc. Two types of quick release plates are included for quick switching between handheld, tripod, and gimbal modes.​ The ergonomic wrist strap takes a lot of pressure off your hand whether shooting horizontally or vertically, and provides more stability for the user.​ The Cage weighs only 370g (with handle) so even with a lot of accessories attached, the whole setup remains portable for handheld shooting.

Magnetic tools including a flathead screwdriver and an M2 hex key are stored at the bottom. The handle comes with three cold shoe mounts and has an Allen key built into it. Safety pins help lock the handle securely to the cage

Compatibility:

Fujifilm X-H2

Fujifilm X-H2s

Key Features
17.7 x 12.6" Compact Size
Dehumidified Storage Space
Measuring only 17.7" in height and 12.6" across, the HC40X Electronic Auto-Control Dry Cabinet from Sirui has a compact size that can be fit in more spaces. And weighing only 16 lb, it isn't too difficult to move it from place to place. The dry cabinet features a 40L capacity where you can store lenses, antiques, and other items that you want to keep out of humid environments.

This electrically-powered dry cabinet converts water molecules into droplets and discharges them out in order to ensure a dehumidified storage space. This condensation process is quiet and energy-efficient. In case of sudden power failure, the cabinet can still maintain low humidity values for hours.

High-precision sensors are installed in the cabinet to measure temperature and humidity values. These values are shown in real time on a built-in digital display, which has three operational buttons.

The body of the cabinet is made of A3 cold plates. The door is made of tempered glass and features a magnetic sealing ring on the door frame, ensuring waterproof and dustproof performance. Sponge mats are laid on the surface of the cabinet floor.

Key Features
Protect Items from Dust, Dirt, Humidity
Controllable Dehumidifying System
Easy-to-Read LCD Screen
Two Adjustable Shelves
Welded 1.2mm-Thick Steel Enclosure
Tempered Glass Door with Air-Tight Seal
Silent Running, Energy Efficient
A controllable environment for storing your photographic gear and other valuables, the HC-70 Electronic Humidity Control Cabinet from Sirui features an automatic dehumidifying system along with a durable construction for long-term safe-keeping of items. A bright LCD screen displays the interior humidity levels along with the inside temperature, in both °F and °C, for quickly monitoring the cabinet's conditions. The exterior is constructed from welded 1.2mm-thick steel and a tempered glass door, which features air-tight seals to also protect the cabinet's contents from exterior moisture and dust. This HC-70 cabinet measures 26.8 x 15.7 x 13.2" and features two adjustable shelves, which can be positioned depending on the size of the items you are storing, and the cabinet is lined with foam to protect items against scratching or impacts. Offering controlled environmental conditions for your delicate valuables, this cabinet helps to eliminate moisture, dust, and dirt for long-term storage of a variety of items.

Electronic humidity control system is ideal for long-term storage applications, including protecting valuables, jewelry, lenses, photographic and optical equipment, electronic products, and more.
Button control panel allows you to input specific interior conditions for storage.
Easy-to-read LCD screen displays percentage of humidity as well as interior temperature in °F/°C.
Two adjustable shelves can be positioned depending on the size of the items being stored.
Foam lined interior for added protection when storing delicate items.
Durable cabinet enclosure is constructed from welded 1.2mm-thick cold-rolled steel and the door is made from tempered glass.
Air-tight seal prevents dust or moisture from entering the cabinet.
Control system will maintain the relative humidity level for up to 24 hours after the power is shut off.
Dehumidifying system quickly controls humidity and temperature levels, is energy efficient, and silent running.
In the Box
Sirui HC-70 Electronic Humidity Control Cabinet
Power Cable
2 x Keys
2 x Shelves
4 x Shelf Brackets
3 x Shelf Mats

For FUJIFILM GFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1
The EC-XT S Small Eyecup for Select FUJIFILM Cameras from FUJIFILM will fit directly onto the viewfinder of theGFX100, GFX100S, GFX50S II, GFX 50S, X-H2S, X-H1, X-T4, X-T3, X-T2, and X-T1 cameras. The eyecup blocks stray light, which creates glare and would make it difficult to see the image, from entering the camera's viewfinder.

This eyecup can be used as a replacement or as a spare, and it is thinner than what originally comes with the camera, which makes it easier to view for users that wear eyeglasses. At the same time, the thinner eyecup still protects your glasses from being scratched.

Premium aluminum alloy construction is a perfect match to the Fujifilm X-T30 II X-T30 X-T20 X-T10 camera body
Anti-slip pads design for better protecting your devices. Offers a more comfortable and secure hold for shooting
Access to battery and memory card without taking off the grip; features a slot for connecting a wrist strap
Adopts Arce Swiss type Quick Release plate design
Replaces Fuji Fujifilm MHG-XT0 Hand Grip

. Made of aviation aluminum alloy with CNC machining and anodized surface, solid, durable, and wear-resistant.
2. Light weight and strong structure, high strength, good corrosion resistance and good durability.
3. Non-slip design: This product is made of anti-slip mat made of rubber material, which is more practical.
4. Vertical shooting: This product support camera, which helps you to open your vertical shooting era and is more convenient.
5. 1/4 inch screw at the bottom, easy to install and provides a secure and stable support for your camera.
6. Weight: 176g.

Very useful for changing orientation when mounting to a tripod. Good build quality as well. It does block the screen from rotating all the way out but its not too big a deal to get around.