Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Colour Black
Brand LEOFOTO
Compatible devices Camera
Item weight 365 Grams
Maximum weight recommendation 44 Pounds
About this item
Panning base diameter: 60mm
Height: 62mm
Base Thread Socket:UNC 3/8"-16
Max load: 20kg ,weight: 360g
-/+ 10 degrees dual axis adjustments Horizontal, tilting, vertical 3 axis can be controlled separately

Key Features
Dual Ball Heads
1/4" Connectors at Each End
Supports up to 8.8 lb.
The GVM Aluminum Alloy Adjustable Magic Arm greatly expands your options when using a camera, smartphone, LED light, monitor, microphone, etc. It features 1/4" bolts on each end and 180° rotation for your gear. The Magic Arm supports equipment up to 8.8 pounds.

[Desk Mounting Stand]: You can mount the stand on the table with practical C-clamp that is up to 2.7 inch, saving much available space.
[Durable Material Made]: Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.
[Applicable and Universal]: Desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4? adapter, such as ring light, DSLR camera, video camera, panel light
[What you get]: an aluminum stand

[Desk Mounting Stand]: You can mount the stand on the table with practical C-clamp that is up to 2.7 inch, saving much available space.
[Adjustable Tabletop Light Stand]: Height of stand can be expanded from 12.9 inch(32.7cm) to 22 inch(56cm), support thickness from 0.6 inch(1.5cm) to 3.4 inches(8.8cm).
[Durable Material Made]: Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.
[Applicable and Universal]: Desk clamp stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4? adapter, such as ring light, DSLR camera, video camera, panel light
[What you get]: an aluminum stand

Suitable for home studio or small spaces
Made of quality fabric that does not wrinkle
Pneumatic system for fabric stability
We will roll into an aluminum case
Weight: 8.2 kg
Screen size: 1.5×2 m

Key Features
Load Capacity: 22 lb
Height: 15.75"
Weight: 14.6 oz
10-Layer Toray Carbon Fiber
CNC-Machined Aluminum
360° Horizontal Movement
180° Vertical Movement
Mounting Platform with 3 Set Screws
Rotating Weight Hook for Ballast
Precision Index Scales
The HC-28 Horizontal Panoramic Carbon Fiber Center Column System from Leofoto is a 15.75"" carbon fiber extension set that allows an adjustable center column to be added to a tripod without a center column. The rugged but lightweight carbon-fiber column can be rotated a full 360° and tilted 180° from horizontal to fully vertical in either a standard or inverted orientation. One end of the column features a mounting platform with a reversible 1/4"-20 to 3/8"-16 mounting stud and three set screws to securely mount virtually any tripod head and prevent it from rotating. The other end of the column is a weight hook that can be fully rotated so that it can always be facing up to receive a sandbag, equipment bag strap, or other type of ballast.

360° Rotating weight hook always faces upward when the column is horizontal
180° Vertical tilt to change quickly from landscape to portrait orientation
360° Panning base
Anti-twist system prevents a mounted tripod head from rotating
Precision numbered index scales
Hollowed-out design for reduced weight
Bubble level

Key Features
Allows Multi-Camera Setups & More
24" Long, 32mm Diameter Carbon Fiber Bar
3/8"-16 Base Mount for Tripods
2 x Camera Mount Platforms
Pan and Tilt Adjustment
Additional Gear Supported on the Ends
The Carbon Fiber Horizontal Tripod Arm Kit features a 24" long bar that attaches horizontally to a tripod via a 3/8"-16 female base mount. Secured to the 32mm diameter bar are two tilt-adjustable mounting platforms. These can be moved left and right along the bar as well as tilted forward and backward as needed, and they each offer a 3/8"-16 mounting screw to which you can attach ball heads and other gear. Additionally, there's a 3/8"-16 screw on each end of the bar that you can attach additional gear to via ball heads, clamp adapters, and other support accessories.

Also, the bar itself can be panned 360° as well as slanted left/right, even into a fully vertical position. The maximum weight capacity is 22 lb (when set up horizontally). This bar allows you to mount multiple cameras and other devices and accessories for comprehensive productions, such as multi-camera shoots.

Key Features
Knobs for Pan, Tilt & Tension
55 lb Load Capacity
Quick Release Plate
Arca-Type Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-20x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-type clamp for the included quick release plate. The pan, tilt, and quick release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation.

The interior ball locking of the K-20x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 55 lb. The quick release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-type platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-20x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-type quick release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
66 lb Load Capacity
QR Plate with Anti-Twist Rubber Mat
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-30x Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation, and the quick-release plate has a rubberized surface that prevents camera twist when it's tilted 90°.

The interior ball locking of the K-30x head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 66 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security & stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-30x is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

Key Features
Knobs for Pan, Tilt & Tension
77 lb Load Capacity
Quick-Release Plate with Anti-Twist Pins
Arca-Style Clamp for Quick Release
90° Tilt, 360° Pan
CNC-Machined Aluminum Alloy
The Sirui K-40X Ball Head is an extremely sturdy head with control knobs for pan, tilt, and tension, plus an Arca-style clamp for the included quick-release plate. The pan, tilt, and quick-release knobs are all separate, while the tension knob is integrated into the ball-locking (tilt) knob. The head tilts 90° for portrait orientation. There's also a video pin on the plate to keep camcorders from twisting.

The interior ball locking of the K-40X head has a sphere tolerance of 0.01mm, and it's equipped with an orientation-memory locking dial. This helps yield a high load capacity of 77 lb. The quick-release clamp features a secondary release button that prevents any inadvertent disengagement of the camera/plate from the clamp, thereby adding to the head's overall security and stability. The Arca-style platform conforms to standard sizes, so you can use compatible plates from other manufacturers.

The three control knobs allow a photographer to exercise extremely fine control over the orientation of the camera, whether it's a DSLR, 35mm, medium-format camera, or even a camcorder. Pan, for instance, can be adjusted while the tilt stays locked, enabling precise movement that's measurable – there are degree markers at the panning base for panoramic photography.

The K-40X is CNC-machined from an aircraft-grade aluminum alloy and anodized with an oxidation treatment that ensures a durable, high-quality finish.

Arca-style quick-release clamp with secondary safety lock
Two bubble levels (horizontal and vertical) on the quick-release platform ensure that your framing hews to the horizon in either portrait or landscape orientation
The friction-control knob, integrated into the ball-locking knob, allows the operator to adjust the resistance of the ball's movement
Quick-release plate is aluminum alloy with a rubberized surface
Stainless steel camera screw

The Leofoto LA-284C Athena Series Tripod in Red + LH-30 Ballhead is a stunning carbon fiber tripod with ballhead system that stands out from the crowd. It is designed for use in harsh, wet environments. Made with 10-layer carbon fiber leg tubes and titanium components, it provides excellent corrosion resistance and makes it suitable for use in a variety of conditions. The tripod also features twist-lock joints that repel water, sand, and debris, which helps to minimize the need for maintenance. The LA series tripod features a fixed, compact apex.

Waterproof and sand-proof design
Corrosion-resistant materials
Compact, center column-free design
Fixed apex with 3/8" mounting stud
Independent leg spread
Three Angle Stops: 23-, 55-, and 85°
1/4"-20 threaded Accessory Socket for Monitor, Microphone, LED light or More
Interchangeable Feet (3/8")
Interchangeable titanium foot spike
Carrying Case
10x carbon fiber leg tubes
*Leofoto LA/LP Series tripods are the same tripod with different colors

The included Leofoto LH-30 Low-Profile Ball Head is lightweight aluminum and features an Arca-type compatible quick release system. A precisely-machined ball provides ultra-smooth movements and a large, ergonomically-designed locking knob, enables the movement of the ball head to be controlled. Laser-engraved scales on the panning base provide precise control during panorama shooting and dual drop notches provide the capability for rapidly changing from horizontal to vertical orientation.

Leofoto LA-284C Red Tripod + LH-30 Ballhead:

Max. height: 1290mm / 50.8 inches
Min. height: 160mm / 6.3 inches
Folded length: 540mm / 21.3 inches
Leg sections: 4
Max load: 10kg / 22 pounds
Weight: 1.55kg / 3.42 pounds

GODOX Light Stand LA300 is designed to offer maximum support with minimum size. It is the perfect item for professional studio photography, easy to set up, quick release and lock system fitted for the fast and easy uses.

Godox 303 Aluminio Soporte de Luz altura de 260 cm 3 segmento doblado 97cm pletina 1/4 3/8


Especificación:
Altura plegado: 97cm
Altura extendido: 260cm
Max.Tube: 31.5mm
Min.Tube: 25.7mm
Secciones: 3
De color negro
Peso (kg
Bloqueo Estilo: Perilla
Material: Aluminio (primavera en el interior)
Paquete incluido:
1 x 303 Luz trípode

The aluminum model 304 Light Stand from Godox is a three-section support with braced legs that rises to a maximum height of 6.5', and offers a minimum height of 27.5". The spring-cushioned sections gently lower your gear to avoid impact damage when making height adjustments.

The Leofoto LA-324C Athena Series Tripod in Red + LH-40 Ballhead is a stunning carbon fiber tripod with ballhead system that stands out from the crowd. It is designed for use in harsh, wet environments. Made with 10-layer carbon fiber leg tubes and titanium components, it provides excellent corrosion resistance and makes it suitable for use in a variety of conditions. The tripod also features twist-lock joints that repel water, sand, and debris, which helps to minimize the need for maintenance. The LA series tripod features a fixed, compact apex.

Waterproof and sand-proof design
Corrosion-resistant materials
Compact, center column-free design
Fixed apex with 3/8" mounting stud
Independent leg spread
Three Angle Stops: 23-, 55-, and 85°
1/4"-20 threaded Accessory Socket for Monitor, Microphone, LED light or More
Interchangeable Feet (3/8")
Interchangeable titanium foot spike
Carrying Case
10x carbon fiber leg tubes
*Leofoto LA/LP Series tripods are the same tripod with different colors

The included Leofoto LH-40 Low-Profile Ball Head is lightweight aluminum and features an Arca-type compatible quick release system. A precisely-machined ball provides ultra-smooth movements and a large, ergonomically-designed locking knob, enables the movement of the ball head to be controlled. Laser-engraved scales on the panning base provide precise control during panorama shooting and dual drop notches provide the capability for rapidly changing from horizontal to vertical orientation.


Leofoto LA-324C Red Tripod + LH-40 Ballhead:

Max. height: 1395mm / 54.92 inches
Min. height: 165mm / 6.50 inches
Folded length: 580mm / 22.83 inches
Leg Sections: 4
Max load: 15kg / 33.07 pounds
Weight: 1.95kg / 4.30 pounds

The Leofoto LB-60N is a professional leveling base with a diameter of 60mm of both the tripod plate and the base plate. The Leofoto LB-60N Leveling Base is designed to be used on all Leofoto tripods and of course also on other tripods with a 3/8-inch tripod screw. Thanks to the large carrying capacity of no less than 15 kilos, this is an ideal accessory for the professional photographer who wants to be able to work exactly horizontally.

About this item
►3 Piece Mini Ball Head Kit.
►Includes Invertible FA-05 Cold Shoe Top Plate.
►Includes Removable Cold Shoe Foot.
►Max load: 5kg (11lbs). ►Weight 66g. ►Base Diameter 29mm
►Bottom thread: 1/4" ►Top Screw: 1/4"

The LH series delivers solid performance in all weather and temperature ranges and extensive field use has proven the effectiveness of our innovative design. Its low profile, precision control knobs, and rugged housing make the LH series the ball head of choice for both seasoned professionals and enthusiastic amateurs.

Easy To Handle
Faster Installing And Removing System
Lock Screen For Allen Wrench
Superior And Durable Quality
Ball Diameter: 36mm
Panning Base Diameter: 52mm
Height: 83mm
Mounting Hole: UNC3/8"-16
Max Load: 18kg
Weight: 430g