Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Load Capacity: 12kg
Ultra low profile design
Leg Sections: 4
Weight: 1.4kgs
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-254 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.4kg
Max. load: 12kg
Minimum height: 145mm
Maximum height: 1270mm
Closed size: 525mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-254 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Load Capacity: 15kg
Ultra low profile design
Leg Sections: 4
Weight: 1.6kg
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-284 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.6kg
Max. load: 15kg
Minimum height: 150mm
Maximum height: 1270mm
Closed size: 530mm
Leg diameter 29.4mm – 18.6mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-284 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Key Features
Professional 3-Section Tripod, 75mm Bowl
Broadcast Quality Fluid Head
13.2 lb Payload
Includes Ground and Mid-Level Spreader
17-63" Tripod Working Height
Stepped Counterbalance
0-3 Grades of Pan and Tilt Drag
Includes Pan Bar
The Sirui BCT-2203 Carbon Fiber Tripod & BCH-10 Video Head Bundle features a professional 3-section tripod with a 75mm bowl and a broadcast quality fluid head with a 13.2 lb payload. The tripod includes a ground spreader and mid-level spreader and offers a 17-63" working height. The head comes with a pan bar and provides stepped counterbalance and 0-3 grades of pan and tilt drag.

Sirui BCT-2203 Professional 3-Section Carbon Fiber Video Tripod with 75mm Bowl
The BCT-2203 Professional 3-Section Carbon Fiber Video Tripod from Sirui features a 75mm bowl for compatible fluid heads and supports up to 22 lb loads. It offers a 17 to 63" height range and comes with ground and mid-level spreaders, both of which are removable. The ground spreader has a rubber underside for safer and more secure placement on flat surfaces. When the ground spreader is removed, dual-spiked feet are revealed for use on soft ground.

The 10-layer carbon fiber tripod is designed with multi-tube legs for enhanced stability and reduced vibration. Each leg is adjustable individually and secured with oversized twist leg locks that are easy to handle.

Key Features
75mm bowl
22 lb payload
17 to 63" height range
Removable ground and mid-level spreaders included
Dual-spiked feet
Multi-tube legs
Oversized twist leg locks
Sirui BCH-10 Video Head
For professional video applications, the Sirui BCH-10 Video Head is based off a 75mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 3 steps, with the 0 setting providing nearly-frictionless movement. A 3-step adjustable counterbalance can compensate for cameras weighing up to 13 pounds. The rosette-mounted pan handle easily extends for greater leverage and a second rosette on the side can be used to mount a second handle. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Features
3 levels of friction control for panning and tilting, with 0 position for near-frictionless operation
3 levels of counterbalance adjustment
Dual bubble levels: Illuminated base bubble level and second top bubble level
Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance
Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform
Telescoping handle
Integrated 75mm ball mount
Separate pan and tilt-lock knobs
Quick-release plate included

Key Features
Professional Heavy-Duty 3-Section Tripod
100mm Bowl
Broadcast Quality Fluid Head
39.5 lb Payload
Includes Ground and Mid-Level Spreader
17.5-63" Tripod Working Height
Stepped Counterbalance
0-7 Grades of Pan and Tilt Drag
Dual Pan Bars
The Sirui BCT-3203 Carbon Fiber Tripod & BCH-30 Video Head Bundle features a professional, heavy-duty 3-section tripod with a 100mm bowl and a broadcast quality fluid head with a 39.5 lb payload. The tripod includes a ground spreader and mid-level spreader and offers a 26.5-59" working height. The head comes with two pan bars and provides stepped counterbalance and 0-7 grades of pan and tilt drag.

Sirui BCT-3203 Professional 3-Section Carbon Fiber Video Tripod with 100mm Bowl
The BCT-3203 Professional 3-Section Carbon Fiber Video Tripod from Sirui features a 100mm bowl for compatible fluid heads and supports up to 40 lb loads. It offers a 17.5 to 63" height range and comes with ground and mid-level spreaders, both of which are removable. The ground spreader has a rubber underside for safer and more secure placement on flat surfaces. When the ground spreader is removed, dual-spiked feet are revealed for use on soft ground.

The 10-layer carbon fiber tripod is designed with multi-tube legs for enhanced stability and reduced vibration. Each leg is adjustable individually and secured with oversized twist leg locks that are easy to handle.

Key Features
100mm bowl
40 lb payload
17.5 to 63" height range
Removable ground and mid-level spreaders included
Dual-spiked feet
Multi-tube legs
Oversized twist leg locks
Sirui BCH-30 Video Head
For professional video applications, the Sirui BCH-30 Video Head is based off a 100mm ball mount for use on compatible tripod legs or other accessories such as sliders and jibs. Friction adjustment can be applied in 7 steps, with the 0 setting providing nearly-frictionless movement. A 13-step adjustable counterbalance can compensate for cameras weighing up to 39 pounds. The BCH-20 is controlled with dual rosette-mounted pan handles. Both pan handles easily extend for greater leverage when using heavier cameras. Extra camera-mount screws are kept in 1/4"-20 and 3/8"-16 tapped holes on the sides of the head. When vacated, these holes can also be used as accessory mounting points. The calibrated camera platform secures the camera plate with dual locks, preventing the camera from accidentally falling off the head during adjustment. To save time when balancing your camera, the platform is etched with calibrated measurements. Aluminum alloy is used in the construction for durability while maintaining a manageable weight.

Features
7 levels of friction control for panning and tilting, with 0 position for near-frictionless operation
13 levels of counterbalance adjustment
Dual bubble levels: Illuminated base bubble level and second top bubble level
Dual Safety Lock Quick Release Platform: Prevents the camera from sliding off the head while aligning for proper balance
Calibrated Quick Release Platform: Easily reposition your equipment using the etched scale on the platform
Dual telescoping handles
Extra 1/4" and 1/8" screws stored in the integrated threads
Integrated 100mm ball mount
Separate pan and tilt-lock knobs
Quick-release plate included

Key Features
Load Capacity: 6.6 lb
Maximum Height: 60.4"
Minimum Height: 8.6"
Folded Length: 20.2"
Leg Sections: 4
Aluminum-Constructed Legs
Flip Leg Lock System
Fluid System for Smooth Pans and Tilts
Spring-Assisted Counterbalance
TY-70A Quick-Release Plate
Gain the advantage of using the ET-2004 Aluminum Tripod with VA5 Video Head Kit from Sirui, where features from both the photo and video worlds combine into one tripod. With the quickness of the tripod's flip leg lock system and the compact size of the fluid head, you can be ready to go and capture video at a moment's notice.

Sirui VA-5 Ultra-Compact Video Head
The SIRUI VA-5 Ultra-Compact Video Head uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 6.6 lb. It features independent pan and tilt locks and uses an internal spring-assisted counterbalance mechanism for smoother tilt movements with heavier cameras. A TY-70A quick-release plate comes included, for forward/backward adjustment possible when attached to the head to help balance your camera. A dual safety lock system prevents the plate and your camera from falling off the head when the primary locking mechanism is loosened. To release the plate, simply press the secondary release button. To assist in horizontal alignment of your shots, the head has two bubble levels: one on the base of the head to align the tripod and one on the top of the head to align the camera. One pan handle comes included.

For DSLRs or compact video cameras up to 6.6 lb
Fluid system for smooth pan and tilts
Internal spring-loaded counterbalance mechanism
Quick-release plate with forward/backward adjustment
Dual safety lock system prevents plate from slipping off head
Two bubble levels: one at base of head, one a top of head
Accepts SIRUI TY-50/60/70/70-2 and LP-40/75 and many Arca-compatible quick release plates
Sirui ET-2004 Travel Aluminum Tripod
The ET-2004 Travel Aluminum Tripod from Sirui is a 4-section support with a flip leg lock system that you can disengage to give you the ability to extend the legs along with the standard rapid center column to a maximum height of 57.1". With its three variable leg angles and independent leg spread, the tripod's legs can conform to uneven terrain; splaying the tripod's legs out and switching the standard center column to the included short column, the support can go to a minimum height of 5.3". The legs fold in the reverse to a compact 16.9" to travel with the tripod, and the rubber feet on the legs prevent the tripod from sliding on smooth and flat surfaces. In addition, the feet retract back to reveal metal spikes to further stabilize the support on softer terrain.

Key Features
Load Capacity: 33.1 lb
Maximum Height: 68.1"
Minimum Height: 9.1"
Folded Length: 24.6"
Leg Sections: 4
Weight: 4.5 lb
Aluminum-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The R2004 Aluminum Tripod with E-20 Ball Head set from Sirui combines the lightweight and portable R2004 aluminum leg set with the versatile E-20 ball head with Arca-type quick release system to form a compact and lightweight tripod that is equally at home in the studio or on location.

Sirui R2004 Aluminum Tripod
The 3.7 lb R2004 Aluminum Tripod from Sirui is a 4-section support with aluminum-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Sirui E-20 Ball Head with TY-50E Plate
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
Load Capacity: 33.1 lb
Maximum Height: 64.2"
Minimum Height: 15.2"
Folded Length: 20.7"
Leg Sections: 4
Weight: 2.9 lb
Carbon Fiber-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The 2.9 lb R2204 Carbon Fiber Tripod from Sirui is a 4-section support with carbon fiber-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Technical data Softbox
- 16 struts
- Diameter: 101 cm
- Depth: 43.5 cm
- Pack size: Height 65 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1800 g

Compatibility
SIRUI C-Series LED Continuous Lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX105 softbox 101cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

- 16 struts
- Diameter: 60 cm
- Depth: 30 cm
- Pack size: Height 42.5 cm / Diameter: 18 cm
- Weight (with grid and diffuser fabrics): 1100 g

Compatibility
SIRUI C-Series LED continuous lights
Flashes or continuous lights with Bowens S-Type bayonet

Scope of delivery
1x SIRUI RGX60 softbox 60cm
1x front diffuser
1x inner diffuser
1x grid
1x softbox bag
*flashgun, continuous light & tripod not included.

Key Features
75mm Anamorphic Fuji X Mount Cine Lens
f/1.8 Maximum Aperture, 13-Blade Iris
Robust Aluminum Lens for APS-C Cameras
2.4:1 Aspect Ratio; 13-Blade Iris
1.33x Cinematic Anamorphic Squeeze
Schott Glass with Nano Coatings
Distance Markings in Feet and Meters
Horizontal Blue Streaks, Oval Bokeh
Manual Focus, M67 Filter Size
Capture cinematic widescreen images when using a cine camera with an APS-C sensor size with this 75mm f/1.8 1.33x Anamorphic Lens from Sirui. The lens features a Fuji X mount and captures a widescreen 1.33x anamorphic image squeeze with an ultra-wide 2:4:1 aspect ratio when used with an APS-C sensor size. This design gives you a 33% increase in the horizontal field of view for a beautiful cinematic widescreen look.

This 75mm manual-focus lens is designed with a durable housing and features optics with protective lens coatings, 16 elements in 12 groups, a 13-blade iris, a minimum focus distance of 3.9', and a fast f/1.8 maximum aperture. It can also produce horizontal blue streaks with less stray light and has a soft, oval bokeh with a shallow depth of field while maintaining a sharp focus. You can utilize 67mm filters on the front of the lens, and it features distance markings in both feet and meters.

Key Features
Robust lens with advanced optics for cameras with an APS-C sensor
Anamorphic 2.4:1 format in a 16:9 frame after de-squeeze
Horizontal blue streaks with less stray light
Soft, oval bokeh with a shallow depth of field
13-blade iris
3.9' minimum focusing distance
67mm filter thread
Magnification: 1:14.47 (V), 1:18.45 (H)
Manual focus
Optical design features 16 elements in 12 groups
Distance markings in feet and meters

150w Bi-colour Monolight
Lightweight compact design
RCM approved for use in Australia
2800-7000K
12 lighting effects
Bluetooth app and unit controllable
6100LUX @1m
Dual power options
96 CRI, 98 TLCI
Introducing the Sirui C150B Bi-Colour LED Monolight.

Portable, compact, and high-powered the C150B is perfect for a constant light source for photography or video.

The C150B has an adjustable temperature from 2800k – 7000k, which is perfect for matching ambient light. An ultra-quiet operation matches perfectly with video use, where any ambient noise needs to be kept at a minimum. The C150B can be controlled via the SIRUI light app via Bluetooth or directly on the light controller itself. Twelve modes can be implemented to achieve different lighting situations or effects.

The Bowens mount is compatible with a vast range of diffusers or modifiers on the market, including Sirui’s range of soft boxes and diffusers. The U shaped bracket is perfect for quick and easy direction change and is easy to attach to a light stand.

Perfect Travel Tripod
Reverse-Folding Legs
Removable Center Column for Low-Angles
Arca-Type Compatible QR Plate
Includes Soft Case and Tools
Weighs only 1kg
The Sirui Traveler 5A Aluminium Tripod with 3T-35 Ball Head – small and compact, yet extremely stable.

This high-quality travel tripod from SIRUI offer secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and can be packed into any bag. The legs can be folded up by 180° meaning that the tripod can be collapsed to a height of just 33cm. Each leg is made of 5 sections with 4 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces. Cold-weather grips are a SIRUI standard offering control in cold weather environments. The Traveler 5 Series features a removable centre column. The head can also be mounted directly onto the tripod shoulder, increasing stability. For additional stability, there is a small keyring with a carabiner underneath the tripod shoulders so you can mount additional weight.

Tripod specifications (Including Head)
• Material: Aluminium
• Extendible and removable centre column
• Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
• Legs fold up by 180°
• Sealed twist locks for secure support
• Carabiner for stabilising and cold weather grips
• Max. load: 4kg
• Height range – 15.5cm – 138cm
• Closed size: 33cm
• Tube diameter: 10 – 22mm
• Weight: 1kg
– Colour: black

Ball head specifications
– Material: Aluminium
– 360° panorama function – infinitely variable friction control
– Rubber release plate – size: 30x38mm
– Release plate with 1/4″ stainless steel screw – head with 3/8″ thread
– Safety Lock System – prevents the plate from accidentally slipping
– Vertical slot
– Max. load: 4kg
– Height: 70mm
– Base plate: ø37mm
– Weight: 172g (including plate)
– Colour: black

Included
1x SIRUI Traveler 5A tripod aluminium black
1x SIRUI 3T-35K ball head black
1x SIRUI TY-C10 release plate black
1x Transport case

This high-quality travel tripod from SIRUI offers secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and fits packed into any bag.

The legs can be swivelled upwards by 180°, so that the tripod is just 33cm high when folded (with head). Each leg consists of 5 sections with 4 sealed ring locks. The rubber feet allow the tripod to stand securely on any surface.

The cold protection handles are also part of the SIRUI standard, as well as the practical carrying bag.

The tripod offers a removable and extendable center column. The head can therefore be placed directly on the tripod cross, which significantly increases stability. For additional stabilization, there is a small key ring with a carabiner at the bottom of the tripod cross.

The ball head B-00K works very smoothly and softly. The Safety Lock System with Security Pin, which secures the quick release plate and releases it at the push of a button. It is no longer necessary to open the whole clamp. The base can be rotated 360°, ideal for panoramic shots.



Features
- Best quality aluminium
- Extendable and removable center column
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Legs can be folded upwards by 180°
- Semi-automatic leg angle adjustment
- Sealed twist locks for a firm hold
- Carabiner for stabilization
- Cold protection handles made of foam rubber
- 360° panorama function
- Rubberized interchangeable plate - Dimensions: 30x38mm
- Interchangeable plate with 1/4" stainless steel screw
- Tripod connection 3/8" female thread
- Safety Lock System - prevents plate from slipping
- 90° portrait notch

Technical data tripod with ball head
- Leg sections: 5
- Min. height without center column: 160mm
- Max. height with center column: 1380mm Height with center column: 1380mm
- Pack size: 330mm
- Tube diameter: 10 - 22mm
- Weight: 1,05kg
- Max. Max. load: 4kg
- Material: Aluminium
- Colour: black

Technical data ball head
- Height: 73mm
- Base diameter: 42mm
- Weight: 215g
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: Aluminium
- Colour: black

Scope of delivery
1x SIRUI Traveler 5AX tripod aluminium black
1x SIRUI B-00K ball head aluminium with interchangeable plate
1x SIRUI TY-C10 quick release plate
1x carrying case

SIRUI Traveler 7A - Tripod / Monopod aluminium with ball head

All-round tripod with ball head
Those looking for a compact all-round tripod will be happy with the SIRUI Traveler 7. With its powerful ball head and integrated monopod, this small tripod offers everything a photographer needs. Whether in the bustling big city, exploring exciting landscapes, travelling or in the studio at home, the Traveler 7 is always at your side. And the 46.5 cm packing size turns into a tripod up to 171 cm tall.

Turn a tripod into a monopod
One leg of the tripod can be removed and used as a standalone monopod. This feature turns the Traveler 7 into a 2in1 tripod that lets you handle any situation. If that is not enough, the monopod with the centre column can even be extended to an incredible 174.5 cm working height (with head).

If you prefer it low, you can also mount the centre column upside down. Your camera has never been closer to the ground!

Stability and intuitive operation
With its non-slip rubber feet and the metal spikes included in the delivery, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be released and locked again in no time at all using the twist locks (ring locks). Thanks to the soft sponge rubber grips you always have your tripod safely under control. In winter they also serve as protection against the cold.

Compact packing size
The proven 180° flip-over function of the legs also makes this SIRUI tripod a true packing miracle. The Traveler 7 measures just 46.5 cm when packed. The ball head is completely enclosed.

Including ball head in black
It is equipped with the Safety Lock System to prevent the removable plate from accidentally slipping off. It also has a levelling level and a 360° panorama scale. It is compatible with the Arca Swiss System.

Features
- Monopod integrated
- Aluminium best quality in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Centre column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilising hooks and cold protection handles

Technical Data Tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. height with centre column: 1710mm
- Height of monopod: 500-1745mm
- Packing size: 465mm
- Tube diameter: 15 - 25,8mm
- Weight: 1,93kg
- Max. Load capacity: 8kg
- Material: aluminium

Technical data ball head
- Weight: 0,28kg
- Height: 88mm
- Ball diameter: 29mm
- Base diameter: 43mm
- Levelling level and safety pin
- Incl. exchangeable plate (Arca Swiss compatible)
- Material: aluminium


Scope of delivery
1x SIRUI Traveler 7A tripod/ monopod aluminium
1x SIRUI ball head aluminium with interchangeable plate
3x metal spikes
1x transport bag

Designed Specifically for Fujifilm Fuji X100V
Protect housing and keypad against scratching, scraping and abrasion, moreover all function can be used freely
Lightweight It is made of strechable, tenacious, soft high quality healthy material
The Durable Soft Silicone offers the maximum protection(scratch and corner protection)
Soft and comfortable touch, easy to grip and light weight; Easy to install and remove

Tailored for camera Fuji X-T3, weight: 50g
Battery port and all buttons are available, Do not affect the use of screen rotation
Surface is soft and smooth
Protect your camera from scratches and dirt
Several colors to choose-Black,Coffee,Camouflage,Red, Orange, Yellow

the solution for keeping your lenses and sensors clean and free from dust and grime.

This kit includes various tools such as a dust blower, three-in-one lens pen, soft brush, tweezers, alcohol-free cleaning solution, microfiber cloths, cotton buds, cleaning wipes, lens cleaning tissue, and a clear accessory container, all packed in a convenient carry bag. Whether you're a professional photographer or a hobbyist, this cleaning kit is an essential accessory for maintaining the quality of your lenses and ensuring that you always capture clear, crisp images.

PERFECT FIT - Custom designed for both Fujifilm X-T5 Mirrorless Camera; Use a real Fujifilm XT5 camera as the model, the XT5 half case fits the X-T5 camera perfectly and will not affect the use of microphone, earphone, tripod and other external XT5 accessories
MATERIAL - This Fuji XT5 case is made of high quality Vintage PU Leather, the interior is suede. The soft interior layer and rugged construction will protect your XT5 camera from scratches, damages and dirt
MULTIFUNCTION - This Fuji X-T5 half case can enhance the protection of your XT5 camera. And it can be used as XT5 grip to increase the sense of grip when using your camera. Designed for efficient photography, you can access all XT5 peripheral ports, card slots, buttons, and connect with tripod
CONVENIENT TO USE - Special design make you freely to flip the XT5 camera screen and easy to install. There is a battery opening at the bottom, you don't need to take off the X-T5 half case when you change battery or SD Card. You also don’t need to take off the half case when you connect tripod or data line, avoiding frequent disassembly
STYLISH DESIGN - Vintage style never out of date, durable material and lightweight features make it suitable for travel and outdoor use. Whether you are a beginner or a experienced photographer, you will want these lightweight leather X-T5/XT5 half cases at your side