Key Features
46" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 48" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 46" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
6 x Camera Control Cables Included
The 32" GVM Professional Video Aluminum Alloy Motorized Camera Slider features an 11-pound horizontal load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The aluminum rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are included allowing the slider controller to interface with most cameras.

Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Key Features
30" Quiet Motorized Sliding Range
Supports Cameras up to 11 Pounds
Programmable Shooting Modes
Straight, Parallax, or 120° Panning
Height-Adjustable Legs
Three 1/4"-20 & 3/8"-16 Mounting Points
NP-F-Type Battery Lasts About 8 Hours
Ball Joint Head Included
6 x Camera Control Cables Included
The 32" GVM Professional Video Carbon Fiber Motorized Camera Slider features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode. The carbon fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120° panoramic camera move.

The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.
Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the slider as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject centered during the move, or it pans the camera up to 120° to create a panoramic shot.
Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon, Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.

Compatible with FUJIFILM, Canon, Nikon, Olympus, and Sony cameras, this Lux Senior Retro Camera Flash from Godox is a diminutive 7 x 4.5 x 3.3".

Compatible with FUJIFILM, Canon, Nikon, Olympus, and Sony cameras, this Lux Senior Retro Camera Flash from Godox is a diminutive 7 x 4.5 x 3.3" light source with basic features that is small enough to have it regularly mounted on your camera.

Godox Lux Senior
With a vintage inspired design and a distinct dark green finish, the unit has a simple dial that correlates ISO with apertures, power levels, and shooting distances. For example, if you want to shoot at 5' with an ISO of 400, the dial lines up f/5.6 and 1/16 power.
The flash has an Auto Mode, too, that defaults to f/2.8 at ISO 100.
Control features include an Optical Mode that offers S1 and S2 settings. In S1 the flash will fire in response to another manual or TTL flash, while in S2, the Retro Flash will respond similarly, but ignore the initial flash.
The unit runs on its rechargeable battery and comes with a triggering cable and a storage bag.

Compatible with FUJIFILM, Canon, Nikon, Olympus, and Sony cameras, this Lux Senior Retro Camera Flash from Godox is a diminutive 7 x 4.5 x 3.3" light source with basic features that is small enough to have it regularly mounted on your camera.

Godox Lux Senior
With a vintage inspired design and a distinct pink finish, the unit has a simple dial that correlates ISO with apertures, power levels, and shooting distances. For example, if you want to shoot at 5' with an ISO of 400, the dial lines up f/5.6 and 1/16 power.
The flash has an Auto Mode, too, that defaults to f/2.8 at ISO 100.
Control features include an Optical Mode that offers S1 and S2 settings. In S1 the flash will fire in response to another manual or TTL flash, while in S2, the Retro Flash will respond similarly, but ignore the initial flash.
The unit runs on its rechargeable battery and comes with a triggering cable and a storage bag.

Compatible with FUJIFILM, Canon, Nikon, Olympus, and Sony cameras, this Lux Senior Retro Camera Flash from Godox is a diminutive 7 x 4.5 x 3.3" light source with basic features that is small enough to have it regularly mounted on your camera.

Godox Lux Senior
With a vintage inspired design and a distinct red finish, the unit has a simple dial that correlates ISO with apertures, power levels, and shooting distances. For example, if you want to shoot at 5' with an ISO of 400, the dial lines up f/5.6 and 1/16 power.
The flash has an Auto Mode, too, that defaults to f/2.8 at ISO 100.
Control features include an Optical Mode that offers S1 and S2 settings. In S1 the flash will fire in response to another manual or TTL flash, while in S2, the Retro Flash will respond similarly, but ignore the initial flash.
The unit runs on its rechargeable battery and comes with a triggering cable and a storage bag.

Compatible with FUJIFILM, Canon, Nikon, Olympus, and Sony cameras, this Lux Senior Retro Camera Flash from Godox is a diminutive 7 x 4.5 x 3.3" light source with basic features that is small enough to have it regularly mounted on your camera.

Godox Lux Senior
With a vintage inspired design and a distinct red finish, the unit has a simple dial that correlates ISO with apertures, power levels, and shooting distances. For example, if you want to shoot at 5' with an ISO of 400, the dial lines up f/5.6 and 1/16 power.
The flash has an Auto Mode, too, that defaults to f/2.8 at ISO 100.
Control features include an Optical Mode that offers S1 and S2 settings. In S1 the flash will fire in response to another manual or TTL flash, while in S2, the Retro Flash will respond similarly, but ignore the initial flash.
The unit runs on its rechargeable battery and comes with a triggering cable and a storage bag.

Designed for close-up photography, the MF12 Macro Flash from Godox makes macro photography easy. This flash head enables you to shoot beautiful and sharp photos of small subjects such as plants, animals, and insects at an extremely close distance. The MF12 can be mounted on the included flash stand and features an adjustable head for quick positioning. For added versatility, the flash can be mounted directly to a lens via an optional adapter, which lets you mount up to six MF12 flash heads. As an off-camera TTL flash, the MF12 can work with the Godox XPro, X1, X2, and other wireless flash triggers that are compatible with main brand cameras such as Nikon, Sony, Canon, FUJIFILM, Olympus, and Panasonic.

Designed for close-up photography, the MF12 Macro Flash 2-Light Kit from Godox makes macro photography easy. The flash heads enable you to shoot beautiful and sharp photos of small subjects such as plants, animals, and insects at an extremely close distance. The MF12 flash heads can be mounted on the included flash stands and feature adjustable heads for quick positioning. For added versatility, the flashes can be mounted directly to a lens via the included adapter rings and mounting ring that lets you mount up to six MF12 flash heads. Also included is an Extreme Close-Up Positioning Adapter with a specially designed slope structure that lets you angle the flash heads inwards toward the lens for extreme close-up photography. For on and off camera use, the flash heads require a separately purchased transmitter and are compatible with the Godox XPro, X1, X2, and other select wireless flash triggers for main brand cameras such as Nikon, Sony, Canon, FUJIFIM, Olympus, and Panasonic.

Compatible with Canon, Nikon, Sony, Panasonic, Olympus, Fuji, and Pentax DSLR cameras with a hot shoe, the MF-R76 Macro Ring Flash from Godox illuminates your subject with a soft and even light, which is ideal for revealing small, close-up details. The ring light consists of two components, a controller that slips into your camera's hot shoe and the ring flash that mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to ensure wide compatibility with most lenses. The control unit powers the system via a long-lasting rechargeable lithium battery, which can provide up to 660 full-power flashes. The manual unit regulates light intensity in 1/3 EV increments from 1/1 full power to 1/128, and a large LCD panel conveniently displays flash settings for easy navigation and control.

Compatible with Canon E-TTL, the MF-R76C TTL Macro Ring Flash from Godox illuminates your subject with a soft and even light, which is ideal for macro shooting scenes. The ring light consists of two components: a controller that slips into your camera's hot shoe, and the ring flash, which mounts on your lens. Godox includes 49, 52, 55, 58, 62, 67, 72, and 77mm adapter rings to ensure wide compatibility with most lenses. With a guide number of 45.9' at ISO 100, the MF-R76C provides detailed, wrap-around lighting for your close-ups. The twin-tube design also allows users to set each side to different power ratios, enabling higher contrast lighting when desired.

Adding to the unit's versatility, the MF-R76C offers TTL and manual modes combined with HSS, first, and second curtain sync capabilities. Besides that, two focus-assist lamps with 10 adjustable levels of power ratio are useful for low light scenes. The control unit powers the system via an included rechargeable lithium battery to ensure long-lasting shoots, giving you up to full-power 550 flashes. A large panel conveniently displays flash settings for easy navigation and control. Godox also supplies a charger, a USB-C cable, and a storage bag.

Godox TT685II Overview

A Guide to On-Camera Flash


Offering full support for Canon E-TTL / E-TTL II and a built-in 2.4 GHz radio system, the Godox TT685C II Flash makes it easy to create both simple and elaborate lighting setups. A powerful and effective lighting tool, this flash features a powerful guide number of 197' at ISO 100 with a zoom range of 20-200mm. The TT685C II operates as a full wireless master or slave unit with TTL functionality, and for maximum versatility this updated unit tilts from -7 to 120° and rotates 330°, giving you more flexible flash angles and a more efficient lighting setup process. Also featured is a new and unique TCM (TTL Converted to Manual) function, which allows for instant conversion from TTL to manual mode. This function helps you lock the proper exposure value and is useful for quickly determining a good starting point for setting external flash units in manual mode. For ease of use, an easy-to-read rear LCD panel illuminates your flash settings, and the flash includes a 2.5mm sync port for basic wired connectivity.

Godox V1 Overview

Godox Introduces Round-Head V1 On-Camera Flash

Offering a powerful 76Ws output along with a distinct design, the Godox V1 Flash is an advanced light source with features that clearly reflect the current state of the industry. Compatible with Canon E-TTL / E-TTL II, this flexible on-camera light is distinguished by its round head, which provides soft, smooth light with gradual fall off that augments the flattering output.

Flash head rotates 330°, tilts -7 to 120°, and has a magnetic surface for lightning-fast attachment of Godox's accessory light modifiers
Powered by a removable 2600mAh lithium-ion battery that will give you up to 480 full-power flashes on a charge
Recycles to full power in just 1.5 seconds
Supports High Speed Sync up to 1/8000 sec for managing bright backgrounds and shooting with wide apertures; also, the V1 supports front and rear-curtain sync
The V1 has an optical receiver as well as a built-in 2.4 GHz radio receiver, which accepts wireless signals from Godox X System transmitters
Godox X System enables controlling up to four wireless groups in a transmitter/receiver configuration whereby settings made on the V1 are duplicated on other synced flashes
Other features include an AF assist lamp, a 3200K LED modeling lamp, and a 2.5mm port for cabled triggering

Godox V860III

Overview

Power, speed, and integrated radio transmission make the Ving V860III TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Canon cameras. Fully compatible with TTL systems, the Ving V860III supports many advanced functions and features. Also, it features the Godox X wireless radio system, which provides both master and slave TTL functionality at a distance. On top of this, the flash is powerful and versatile, featuring a guide number of 197' at ISO 100 and 200mm along with a zoom range of 20-200mm. And this flash runs off a rechargeable lithium-ion battery pack that ensures fast recharge with a capacity of up to 480 full-power flashes.

For general operation, the Ving V860III features full bounce flash capabilities, including tilting and rotation left and right. As a TTL-compatible unit, this flash offers support for high-speed sync, flash exposure compensation, 1st and 2nd curtain sync, and much more. Additionally, it can function as an optical master or slave unit if needed.