Load Capacity: 15kg
Ultra low profile design
Leg Sections: 4
Weight: 1.6kg
Max Height : 127cm
Magnesium leg sockets
Rubber twist leg locks
Metal spikes and rubber feet included
Sirui’s AM-284 tripod combines extremely low weight and a very compact design. It is easy to handle in any situation and provides your camera with a secure support. The legs when collapsed and folded are extrememtly low profile making the tripod very compact and portable. Each leg is made of 4 sections with 3 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces and they can replaced by the included metal spikes to give more traction on softer or slippery surfaces. A stabilising hook on the centre column is a Sirui standard as is the transport bag.

– 10-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
– Locking screw for head
– Legs when folded are very low profile
– Magnesium leg sockets for added stability and low weight
– Stabilising hook which can be removed
– Rubber feet or metal spikes can be mounted

Tripod Kit Specifications

Weight: 1.6kg
Max. load: 15kg
Minimum height: 150mm
Maximum height: 1270mm
Closed size: 530mm
Leg diameter 29.4mm – 18.6mm
Ball Head Specs

Load Capacity – 20kgs
Base Diameter – 33mm
Height – 83.5mm
Weight – 360gr
Included

1x SIRUI Am-284 carbon fibre tripod
1x Transport bag with strap
3x Metal Spikes
3x Rubber Feet
A-10R Ball head
Quick Release plate
Tool kit and manual

Key Features
Load Capacity: 33.1 lb
Maximum Height: 68.1"
Minimum Height: 9.1"
Folded Length: 24.6"
Leg Sections: 4
Weight: 4.5 lb
Aluminum-Constructed Tubes
Twist-Leg Lock System
Reversible Rapid Center Column
Wing-Nut Locking Collar
The R2004 Aluminum Tripod with E-20 Ball Head set from Sirui combines the lightweight and portable R2004 aluminum leg set with the versatile E-20 ball head with Arca-type quick release system to form a compact and lightweight tripod that is equally at home in the studio or on location.

Sirui R2004 Aluminum Tripod
The 3.7 lb R2004 Aluminum Tripod from Sirui is a 4-section support with aluminum-constructed tubes and a twist-leg lock system. You can disengage the locks; therefore, the legs are extendable, along with the rapid center column, to a maximum height of 64.2". With variable leg angles, you can splay the legs out, so the tripod drops to a minimum height of 15.2". Even with the low height, the center column is reversible to get closer to the ground, which is ideal for macro photography. The unique wing-nut design locks the collar to keep the center column at its required height, and the tripod folds to a length of 20.7" to easily transport or store away. The rubber feet retract back to expose the stainless-steel spikes to further stabilize the tripod on icy surfaces or soft terrain.

Sirui E-20 Ball Head with TY-50E Plate
The E-20 Ball Head with TY-50E Plate from Sirui is a 12.7 oz aluminum camera support that features an Arca-type compatible quick release system. The head has two separate knobs, the larger knob unlocks to release the ball movement, and the independent pan lock releases the 360° panning base, which has 5° scale markings.

The weight capacity of the ball head is 26.5 lb, which makes it suitable to support large DSLR and medium format cameras. Furthermore, inside the clamp there is a safety stop and on the side of the clamp a security pin release button, which prevents the plate from accidentally sliding and falling out. The included TY-50E plate has a machined eyelet for a hand or shoulder strap.

Arca-type compatible ball head with safety stop and security pin release button
360° panning base with 5° scale increments
Integrated spirit bubble level for balancing
Machined eyelet on the quick release place for a hand or shoulder strap

Key Features
75mm Anamorphic Fuji X Mount Cine Lens
f/1.8 Maximum Aperture, 13-Blade Iris
Robust Aluminum Lens for APS-C Cameras
2.4:1 Aspect Ratio; 13-Blade Iris
1.33x Cinematic Anamorphic Squeeze
Schott Glass with Nano Coatings
Distance Markings in Feet and Meters
Horizontal Blue Streaks, Oval Bokeh
Manual Focus, M67 Filter Size
Capture cinematic widescreen images when using a cine camera with an APS-C sensor size with this 75mm f/1.8 1.33x Anamorphic Lens from Sirui. The lens features a Fuji X mount and captures a widescreen 1.33x anamorphic image squeeze with an ultra-wide 2:4:1 aspect ratio when used with an APS-C sensor size. This design gives you a 33% increase in the horizontal field of view for a beautiful cinematic widescreen look.

This 75mm manual-focus lens is designed with a durable housing and features optics with protective lens coatings, 16 elements in 12 groups, a 13-blade iris, a minimum focus distance of 3.9', and a fast f/1.8 maximum aperture. It can also produce horizontal blue streaks with less stray light and has a soft, oval bokeh with a shallow depth of field while maintaining a sharp focus. You can utilize 67mm filters on the front of the lens, and it features distance markings in both feet and meters.

Key Features
Robust lens with advanced optics for cameras with an APS-C sensor
Anamorphic 2.4:1 format in a 16:9 frame after de-squeeze
Horizontal blue streaks with less stray light
Soft, oval bokeh with a shallow depth of field
13-blade iris
3.9' minimum focusing distance
67mm filter thread
Magnification: 1:14.47 (V), 1:18.45 (H)
Manual focus
Optical design features 16 elements in 12 groups
Distance markings in feet and meters

Introducing the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head: Elevate Your Photography Game with Unmatched Precision and Durability

The Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head is a masterpiece of engineering, designed to exceed the expectations of professional photographers and outdoor enthusiasts. This remarkable tripod and ball head combo offers unparalleled stability, exceptional waterproof capabilities, and precise control, allowing you to capture awe-inspiring images in any challenging environment.

Unrivaled Stability and Durability:

Crafted from premium carbon fiber material, the Sirui ST-124 tripod combines strength with lightweight construction, making it easy to carry without compromising stability. Its robust design allows for a maximum load capacity of up to 12 kilograms, ensuring that your camera and lenses remain secure and steady, even when shooting with heavy equipment. Say goodbye to shaky shots and welcome crystal-clear images that truly stand out.

Weatherproof Performance:

With the Sirui ST-124 tripod, adverse weather conditions are no longer an obstacle. This tripod is not just resistant to dust and dirt but waterproof, making it perfect for photographers who are constantly pushing their boundaries. Whether you’re shooting in the rain, near water bodies, or even in sandy environments, rest assured that your gear will remain safe and protected, allowing you to focus on capturing breathtaking moments.

ST-10X Ball Head for Precise Control:

The included ST-10X Ball Head is a testament to Sirui’s commitment to precision and excellence. With separate knobs for panning, friction control, and locking, you have full control over the movement of your camera. The Arca-Swiss compatible quick-release plate enables seamless attachment and detachment, ensuring swift camera adjustments on the go. The ST-10X Ball Head allows you to capture the perfect composition with ease, empowering your creative vision.the dual panning clamp and base allow for easy panorama shooting.

Versatility and Adaptability:

The Sirui ST-124 tripod is designed to adapt to any shooting scenario. Its four-section legs can be independently adjusted to three different angles, allowing for stable positioning on uneven terrain. The tripod also features a reversible center column, enabling you to achieve low-angle shots or even use it for macro photography. With its versatility, this tripod opens up endless possibilities for your creative exploration.

Ease of Use and Portability:

Setting up the Sirui ST-124 tripod is a breeze, thanks to its user-friendly design and quick-lock leg system. The twist locks ensure fast and secure leg extension and retraction, allowing you to focus on capturing the perfect shot. When it’s time to move or pack up, the tripod collapses to a compact size for easy transportation. Weighing just 1.6 kilograms, the ST-124 is incredibly lightweight, making it a trusted companion for photographers on the move.

Embrace the Sirui ST-124 Waterproof Carbon Fiber Tripod with ST-10X Ball Head and elevate your photography game to new heights. With its unbeatable stability, exceptional weatherproof performance, precise control, and adaptability, this tripod is a must-have tool for professionals and adventurers alike. Don’t let challenging environments hinder your creativity—unleash your vision with confidence using the Sirui ST-124.

– Super low profile design

– 8-layer carbon fibre in 4 sections
– Reversible 1/4 inch and 3/8 inch screw for heads/cameras
– Locking screw for head
– Water and dustproof twist locks
– Stabilising hook

Tripod Kit Specifications:
– Weight: 1.6kg
– Max. load: 12kg
– Tripod height: 450mm – 1710mm
– Closed size: 570mm

Included
1x SIRUI ST-124 waterproof tripod carbon fibre
1x ST-10X Ball head with QR plate
1x Transport bag with strap



The Sirui ST-10X Ball Head are designed and built to the highest standards. The ST-10X ball head is ultra low profile while still maintaining high load capacity.

The base and panning clamp can be smoothly rotated by 360 °, thus panoramic shots are a breeze. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the ST series.

– Ball Diameter: 38mm
– Weight: 0.43kg
– Height: 85mm
– Load Capacity: 20kg

360 ° panorama function via base and also panning clamp and vertical notch
Aluminium knobs for added durability
Easy and fast control of all knobs
Plate with 1/4″ stainless steel screw – head assembly with 3/8″ thread
Safety Lock – prevents slipping of the plate
Sliding Stopper – stops the camera slipping when in portrait mode
Spirit level
Quick release plate

Key Features
Print from the INSTAX MINI LINK App
Prints 2 x 3" Photos
Add Filters and Frames to Your Photos
Compatible with Nintendo Switch App
Add Sketches and Stickers to Your Photos
Add Doodles and Shapes to Your Photos
Print Photos from Videos
Bluetooth Connectivity
Print a QR Codes on Your Images
Compact and Lightweight
Make instant film prints directly from your smartphone with the INSTAX MINI LINK 2 Smartphone Printer from FUJIFILM. This compact mobile printer connects to your smartphone via Bluetooth and works with the free INSTAX MINI LINK app to produce 2 x 3" prints from still images or videos. Prior to printing, images can be decorated with frames, filters, sketches, and stickers. Or use the INSTAXAiR feature to add bubbles, petals, neon, spray paint, glitter, doodles and shapes to your photos, all by drawing in the air. You'll also be able to record a video of the drawing and share the moment as a printable QR code that can be scanned with a smartphone.
Portable, Take-Everywhere Design
Compact, lightweight design is portable for use anywhere
Connects wirelessly via Bluetooth to your smartphone
For use with INSTAX MINI instant film only for printing 2 x 3" photo prints
Requires the free INSTAX MINI LINK smartphone app, available as a free download for iOS and Android devices
Built-in lithium-ion battery lasts for about 100 prints per charge and recharges in 80-120 minutes
Print Mode
Simple Print offers easy and straightforward high-speed printing for producing a print from your smartphone in as little as 15 seconds
INSTAX Camera Mode, along with the MINI LINK 2's built-in motion control, lets you remotely snap photos on your smartphone using the printer's power button to control the shutter and adjust the zoom by tilting the printer
Choose between INSTAX-Rich Mode for more vibrant colors or INSTAX-Natural Mode for a more organic look
Fun Mode
Using the INSTAX MINI LINK app, add frames, filters, sketches, and stickers to your image prior to printing
INSTAXAiR lets you draw whatever you like in the "AiR" and add it to your print. Simple press and hold the feature button on the printer and move it around to doodle and draw. You can also draw with more precision directly in the INSTAX MINI LINK app and record yourself drawing and share it as a QR code on your print
Test your compatibility with a friend using Match Test, where the printer prints a photo of you and friends, analyzes it, and prints a score of up to 100 on the photo. If you prefer quizzes, answer questions and print the results out on a photo
Frame Print lets you add a fun frame design to your print
Collage Print lets you combine multiple images onto a single print
Sketch, edit, and print lets you import and add your hand-drawn sketches or written text to your photos
INSTAX MINI LINK for Nintendo Switch App
Perfect for gamers you want to memorialize an epic battle or record their milestones, a dedicated INSTAX MINI LINK for Nintendo Switch app is available, allowing you to print screenshots from your games
Switch Direct Print lets you choose the screenshot you want to print from the Nintendo Switch, display a QR code that can be scanned by your smartphone, and then print your shot to finish
INSTAXAiR has been updated with a new squid stamp from Splatoon 3
Nintendo character stickers and frames can be added to your prints, including favorites from games like Pokémon Snap, Splatoon 3, Animal Crossing: New Horizons, and Super Mario
The app's theme can be customized depending on your favorite Nintendo game

Key Features
Print from the INSTAX MINI LINK App
Prints 2 x 3" Photos
Add Filters and Frames to Your Photos
Compatible with Nintendo Switch App
Add Sketches and Stickers to Your Photos
Add Doodles and Shapes to Your Photos
Print Photos from Videos
Bluetooth Connectivity
Print a QR Codes on Your Images
Compact and Lightweight
Make instant film prints directly from your smartphone with the INSTAX MINI LINK 2 Smartphone Printer from FUJIFILM. This compact mobile printer connects to your smartphone via Bluetooth and works with the free INSTAX MINI LINK app to produce 2 x 3" prints from still images or videos. Prior to printing, images can be decorated with frames, filters, sketches, and stickers. Or use the INSTAXAiR feature to add bubbles, petals, neon, spray paint, glitter, doodles and shapes to your photos, all by drawing in the air. You'll also be able to record a video of the drawing and share the moment as a printable QR code that can be scanned with a smartphone.
Portable, Take-Everywhere Design
Compact, lightweight design is portable for use anywhere
Connects wirelessly via Bluetooth to your smartphone
For use with INSTAX MINI instant film only for printing 2 x 3" photo prints
Requires the free INSTAX MINI LINK smartphone app, available as a free download for iOS and Android devices
Built-in lithium-ion battery lasts for about 100 prints per charge and recharges in 80-120 minutes
Print Mode
Simple Print offers easy and straightforward high-speed printing for producing a print from your smartphone in as little as 15 seconds
INSTAX Camera Mode, along with the MINI LINK 2's built-in motion control, lets you remotely snap photos on your smartphone using the printer's power button to control the shutter and adjust the zoom by tilting the printer
Choose between INSTAX-Rich Mode for more vibrant colors or INSTAX-Natural Mode for a more organic look
Fun Mode
Using the INSTAX MINI LINK app, add frames, filters, sketches, and stickers to your image prior to printing
INSTAXAiR lets you draw whatever you like in the "AiR" and add it to your print. Simple press and hold the feature button on the printer and move it around to doodle and draw. You can also draw with more precision directly in the INSTAX MINI LINK app and record yourself drawing and share it as a QR code on your print
Test your compatibility with a friend using Match Test, where the printer prints a photo of you and friends, analyzes it, and prints a score of up to 100 on the photo. If you prefer quizzes, answer questions and print the results out on a photo
Frame Print lets you add a fun frame design to your print
Collage Print lets you combine multiple images onto a single print
Sketch, edit, and print lets you import and add your hand-drawn sketches or written text to your photos
INSTAX MINI LINK for Nintendo Switch App
Perfect for gamers you want to memorialize an epic battle or record their milestones, a dedicated INSTAX MINI LINK for Nintendo Switch app is available, allowing you to print screenshots from your games
Switch Direct Print lets you choose the screenshot you want to print from the Nintendo Switch, display a QR code that can be scanned by your smartphone, and then print your shot to finish
INSTAXAiR has been updated with a new squid stamp from Splatoon 3
Nintendo character stickers and frames can be added to your prints, including favorites from games like Pokémon Snap, Splatoon 3, Animal Crossing: New Horizons, and Super Mario
The app's theme can be customized depending on your favorite Nintendo game

Key Features
Print from the INSTAX MINI LINK App
Prints 2 x 3" Photos
Add Filters and Frames to Your Photos
Compatible with Nintendo Switch App
Add Sketches and Stickers to Your Photos
Add Doodles and Shapes to Your Photos
Print Photos from Videos
Bluetooth Connectivity
Print a QR Codes on Your Images
Compact and Lightweight
Make instant film prints directly from your smartphone with the INSTAX MINI LINK 2 Smartphone Printer from FUJIFILM. This compact mobile printer connects to your smartphone via Bluetooth and works with the free INSTAX MINI LINK app to produce 2 x 3" prints from still images or videos. Prior to printing, images can be decorated with frames, filters, sketches, and stickers. Or use the INSTAXAiR feature to add bubbles, petals, neon, spray paint, glitter, doodles and shapes to your photos, all by drawing in the air. You'll also be able to record a video of the drawing and share the moment as a printable QR code that can be scanned with a smartphone.
Portable, Take-Everywhere Design
Compact, lightweight design is portable for use anywhere
Connects wirelessly via Bluetooth to your smartphone
For use with INSTAX MINI instant film only for printing 2 x 3" photo prints
Requires the free INSTAX MINI LINK smartphone app, available as a free download for iOS and Android devices
Built-in lithium-ion battery lasts for about 100 prints per charge and recharges in 80-120 minutes
Print Mode
Simple Print offers easy and straightforward high-speed printing for producing a print from your smartphone in as little as 15 seconds
INSTAX Camera Mode, along with the MINI LINK 2's built-in motion control, lets you remotely snap photos on your smartphone using the printer's power button to control the shutter and adjust the zoom by tilting the printer
Choose between INSTAX-Rich Mode for more vibrant colors or INSTAX-Natural Mode for a more organic look
Fun Mode
Using the INSTAX MINI LINK app, add frames, filters, sketches, and stickers to your image prior to printing
INSTAXAiR lets you draw whatever you like in the "AiR" and add it to your print. Simple press and hold the feature button on the printer and move it around to doodle and draw. You can also draw with more precision directly in the INSTAX MINI LINK app and record yourself drawing and share it as a QR code on your print
Test your compatibility with a friend using Match Test, where the printer prints a photo of you and friends, analyzes it, and prints a score of up to 100 on the photo. If you prefer quizzes, answer questions and print the results out on a photo
Frame Print lets you add a fun frame design to your print
Collage Print lets you combine multiple images onto a single print
Sketch, edit, and print lets you import and add your hand-drawn sketches or written text to your photos
INSTAX MINI LINK for Nintendo Switch App
Perfect for gamers you want to memorialize an epic battle or record their milestones, a dedicated INSTAX MINI LINK for Nintendo Switch app is available, allowing you to print screenshots from your games
Switch Direct Print lets you choose the screenshot you want to print from the Nintendo Switch, display a QR code that can be scanned by your smartphone, and then print your shot to finish
INSTAXAiR has been updated with a new squid stamp from Splatoon 3
Nintendo character stickers and frames can be added to your prints, including favorites from games like Pokémon Snap, Splatoon 3, Animal Crossing: New Horizons, and Super Mario
The app's theme can be customized depending on your favorite Nintendo game

Key Features
Accepts INSTAX SQUARE Instant Film
Produces 2.4 x 2.4" Square Images
Fujinon 65.75mm f/12.6 Lens
Optical Viewfinder with Target Spot
Built-In Flash and Auto Exposure Mode
Selfie Mirror Integrated on Lens
Selfie Mode Minimum Focus: 11.8"
Stylish, simple, and square, the terracotta orange FUJIFILM INSTAX SQUARE SQ1 is an instant film camera that produces large 2.4 x 2.4" square prints. The camera's fun and minimal design incorporates a Fujinon 65.75mm f/12.6 lens, which offers intuitive zone focus control, with a minimum focusing distance of 11.8". A small selfie mirror is built into the front of the lens design for accurately composing self-portraits and a dedicated Selfie Mode can be used to optimize focus and exposure. The camera's design also features an optical viewfinder with a central target spot for accurately composing images. A built-in flash is also featured, for illuminating scenes in low-light, and straightforward auto exposure helps to ensure properly exposed shots in all conditions.

Key Features
Accepts INSTAX SQUARE Instant Film
Produces 2.4 x 2.4" Square Images
Fujinon 65.75mm f/12.6 Lens
Optical Viewfinder with Target Spot
Built-In Flash and Auto Exposure Mode
Selfie Mirror Integrated on Lens
Selfie Mode Minimum Focus: 11.8"
Stylish, simple, and square, the glacier blue FUJIFILM INSTAX SQUARE SQ1 is an instant film camera that produces large 2.4 x 2.4" square prints. The camera's fun and minimal design incorporates a Fujinon 65.75mm f/12.6 lens, which offers intuitive zone focus control, with a minimum focusing distance of 11.8". A small selfie mirror is built into the front of the lens design for accurately composing self-portraits and a dedicated Selfie Mode can be used to optimize focus and exposure. The camera's design also features an optical viewfinder with a central target spot for accurately composing images. A built-in flash is also featured, for illuminating scenes in low-light, and straightforward auto exposure helps to ensure properly exposed shots in all conditions.

Key Features
Accepts INSTAX SQUARE Instant Film
Produces 2.4 x 2.4" Square Images
Fujinon 65.75mm f/12.6 Lens
Optical Viewfinder with Target Spot
Built-In Flash and Auto Exposure Mode
Selfie Mirror Integrated on Lens
Selfie Mode Minimum Focus: 11.8"
Stylish, simple, and square, the glacier blue FUJIFILM INSTAX SQUARE SQ1 is an instant film camera that produces large 2.4 x 2.4" square prints. The camera's fun and minimal design incorporates a Fujinon 65.75mm f/12.6 lens, which offers intuitive zone focus control, with a minimum focusing distance of 11.8". A small selfie mirror is built into the front of the lens design for accurately composing self-portraits and a dedicated Selfie Mode can be used to optimize focus and exposure. The camera's design also features an optical viewfinder with a central target spot for accurately composing images. A built-in flash is also featured, for illuminating scenes in low-light, and straightforward auto exposure helps to ensure properly exposed shots in all conditions.

Key Features
Accepts INSTAX SQUARE Instant Film
Produces 2.4 x 2.4" Square Images
Fujinon 65.75mm f/12.6 Lens
Optical Viewfinder with Target Spot
Built-In Flash and Auto Exposure Mode
Selfie Mirror Integrated on Lens
Selfie Mode Minimum Focus: 11.8"
Stylish, simple, and square, the glacier blue FUJIFILM INSTAX SQUARE SQ1 is an instant film camera that produces large 2.4 x 2.4" square prints. The camera's fun and minimal design incorporates a Fujinon 65.75mm f/12.6 lens, which offers intuitive zone focus control, with a minimum focusing distance of 11.8". A small selfie mirror is built into the front of the lens design for accurately composing self-portraits and a dedicated Selfie Mode can be used to optimize focus and exposure. The camera's design also features an optical viewfinder with a central target spot for accurately composing images. A built-in flash is also featured, for illuminating scenes in low-light, and straightforward auto exposure helps to ensure properly exposed shots in all conditions.

Key Features
Accepts INSTAX SQUARE Instant Film
Produces 2.4 x 2.4" Square Images
Fujinon 65.75mm f/12.6 Lens
Optical Viewfinder with Target Spot
Built-In Flash and Auto Exposure Mode
Selfie Mirror Integrated on Lens
Selfie Mode Minimum Focus: 11.8"
Stylish, simple, and square, the glacier blue FUJIFILM INSTAX SQUARE SQ1 is an instant film camera that produces large 2.4 x 2.4" square prints. The camera's fun and minimal design incorporates a Fujinon 65.75mm f/12.6 lens, which offers intuitive zone focus control, with a minimum focusing distance of 11.8". A small selfie mirror is built into the front of the lens design for accurately composing self-portraits and a dedicated Selfie Mode can be used to optimize focus and exposure. The camera's design also features an optical viewfinder with a central target spot for accurately composing images. A built-in flash is also featured, for illuminating scenes in low-light, and straightforward auto exposure helps to ensure properly exposed shots in all conditions.

Key Features
Wireless iOS/Android App Control
Belt Driven with Battery-Powered Motor
Manual and Looping Motorized Motion
Set A/B Points and Time-Lapse Keyframes
1 to 100% Adjustable Sliding Speed
11 lb Horizontal Payload
Ball Head Included
Six Camera Control Cables Included
1/4"-20 and 3/8"-16 Tripod Mount Threads
Up to 10 Hours of Operation Time
Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Additional Features
1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
1/4"-20 and 3/8"-16 tripod mount threads on the bottom
The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode
In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
Companion mobile app downloadable for free for iOS and Android

Key Features
Wireless Programmable Motorized Slider
Robust 31" Portable Travel Slider
Carbon Fiber Rails
Supports up to 5.5 lb
1/4"-20 and 3/8"-16 Tripod Mounting
Hot Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
Integrated Display on Remote Controller
The 31" GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider is a motorized slider you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of slider travel. The slider carriage has a built-in bubble level, so you can check that your setup is level. Built-in feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot-swap for uninterrupted use. The two included NP-F750 type batteries will run the system for approximately 10 hours. The remote features an integrated display and during time-lapse moves can be turned off to save battery power.

Remote Controller
The wireless controller features its own internal battery and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest

Key Features
Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
360° Pan Range
1/4"-20 and 3/8"-16 Tripod Mounting
Hot-Swappable L-Series Battery Plates
Time-Lapse and Real-Time Capture
6 x Shutter Cables Included
Integrated Display on Remote Controller
The 32" GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel. The slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360° of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power. You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:
DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The wireless controller features an internal battery, and an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move
The remote controller allows you to set keyframes and control the duration of the move
Remote Control
You can use the remote to control the slider in manual video mode, as well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting
The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360° of rotation

Wireless Programmable 3-Axis Slider
Mobile App Control
Carbon Fiber Rails
Supports up to 11 lb
The 32″ ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31″ of travel.

The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.

GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.

You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.

Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:

DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the move

Remote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting

The slider can traverse the 31″ sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation

Color 32"/80cm
Brand GVM Great Video Maker
Compatible Devices Camera, Cellphone
Item Dimensions LxWxH 38 x 24 x 12 inches
Item Weight 10 Pounds
Maximum Weight Recommendation 20 Pounds
About this item
SUPPORT MULTIPLE SHOOTING MODES: Electric camera slider 6 in 1 with tracking shooting, panoramic shooting, time lapse, video capture, free Set starting point and ending point. Set A/B Points and Time-Lapse Keyframes: Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images.
1 TO 100% ADJUSTABLE SLIDING SPEED: The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode, In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest
WIRELESS IOS/ANDROID APP CONTROL: Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion.
1/4"-20 AND 3/8"-16 TRIPOD MOUNT THREADS: The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. 1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)
BELT DRIVEN WITH BATTERY-POWERED MOTOR: The motor is positioned on one end of the slider and features a L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras.

Key Features
26.1MP APS-C X-Trans BSI CMOS 4 Sensor
X-Processor 4 with Quad CPU
DCI and UHD 4K30 Video; F-Log Gamma
2.36m-Dot OLED Electronic Viewfinder
3.0" 1.04m-Dot Tilting LCD Touchscreen
425-Point Phase-Detection Autofocus
Extended ISO 80-51200, 30 fps Shooting
Bluetooth and Wi-Fi; Sports Finder Mode
XC 15-45mm Lens f/3.5-5.6 OIS PZ Lens
Offering powerful stills and video features, combined with a compact, functional design, the FUJIFILM X-T30 II is a versatile mirrorless camera distinguished by advanced stills and video recording along with sleek and intuitive handling characteristics. Featuring a revised image sensor and processor, both high-resolution stills and 4K video can be recorded while an enhanced autofocus system delivers fast and accurate focusing performance. The 26.1MP APS-C-format X-Trans CMOS 4 image sensor features a back-illuminated design to promote greater image quality throughout the sensitivity range along with a 425-point phase-detection autofocus system for quick, precise AF performance and subject tracking. The 100% phase-detect autofocus provides strong face and eye detection autofocus with a new Face Selection option. Complementing the imaging and focusing is the X-Processor 4, which uses four CPUs for faster image processing as well as continuous shooting up to 8 fps with a mechanical shutter, 30 fps shooting at a 1.25x crop and electronic shutter, and internal DCI/UHD 4K30 video recording.

Sharing a familiar aesthetic of FUJIFILM X-series cameras, the X-T30 II sports a silver finish and classically inspired looks, has prominent physical controls, and has a high-resolution 2.36m-dot OLED electronic viewfinder. The rear 3.0" 1.04m-dot tilting touchscreen LCD can also be used for live view shooting and larger image playback. Additionally, the X-T30 II also sports built-in Bluetooth for wireless sharing and remote control.

FUJIFILM X-T30 II Mirrorless Camera (Silver)
Offering powerful stills and video features, coupled with a compact, functional design, the FUJIFILM X-T30 II is a versatile mirrorless camera distinguished by advanced stills and video recording along with sleek and intuitive handling characteristics. Featuring a revised image sensor and processor, both high-resolution stills and 4K video can be recorded while an enhanced autofocus system delivers fast and accurate focusing performance. The 26.1MP APS-C-format X-Trans CMOS 4 image sensor features a back-illuminated design to promote greater image quality throughout the sensitivity range along with a 425-point phase-detection autofocus system for quick, precise AF performance and subject tracking. The 100% phase-detect autofocus provides strong face and eye detection autofocus with a new Face Selection option. Complementing the imaging and focusing is the X-Processor 4, which uses four CPUs for faster image processing as well as continuous shooting up to 8 fps with a mechanical shutter, 30 fps shooting at a 1.25x crop and electronic shutter, and internal DCI/UHD 4K30 video recording.

Sharing a familiar aesthetic of FUJIFILM X-series cameras, the X-T30 II sports a silver finish and classically inspired looks, has prominent physical controls, and has a high-resolution 2.36m-dot OLED electronic viewfinder. The rear 3.0" 1.62m-dot tilting touchscreen LCD can also be used for live view shooting and larger image playback. Additionally, the X-T30 II also sports built-in Bluetooth for wireless sharing and remote control.

26.1MP APS-C X-Trans BSI CMOS 4 Sensor and X-Processor 4
Sharing a sensor with the professional-oriented X-T3, the X-T30 II features an APS-C-format 26.1MP X-Trans CMOS 4 sensor, which has a back-illuminated design to afford smooth tonal rendering, improved low-light performance, and a low native ISO 160 setting. As an X-Trans sensor, it utilizes a randomized pixel array, too, which provides a high degree of image quality and sharpness due to the omission of an optical low-pass filter. Versus conventional pixel patterns, the X-Trans design more closely mimics the organic nature of film in order to produce nuanced colors and tonal transitions, while also reducing moiré and aliasing.

The sensor's design also includes a 100% phase-detection autofocus system, which has 425 selectable points that covers nearly the entire sensor area. This AF system delivers faster, more accurate focusing performance along with low-light sensitivity down to EV -7. Complementing the imaging and focusing capabilities, an updated X-Processor 4 is also featured, and delivers faster focus response for subject tracking and also supports Face- and Eye-Detection AF when working in AF-C mode and when recording video.
The X-Processor 4 also utilizes four CPU units for faster image processing and it benefits overall performance with faster AF and tracking speeds. Quick continuous shooting is possible, up to 8 fps with a mechanical shutter or 30 fps with an electronic shutter and a 1.25x crop, and internal UHD 4K30 video recording with F-Log is also supported.

UHD and DCI 4K Video Recording
More than a stills camera, the X-T30 offers an enticing array of video capabilities, including internal UHD 4K30 video recording at up to 200 Mb/s—and simultaneous external and internal recording is possible. DCI 4K30 and Full HD 1080p120 recording is also possible, and video files can be saved using either MPEG-4 AVC/H.264 or HEVC/H.265 compressions, and 4K. Greatly benefitting overall video performance, the speed of the quad-CPU X-Processor 4 enables fast read speeds when recording 4K video, which helps to reduce rolling shutter distortion when filming moving subjects.
The X-T30 II also includes the F-Log gamma setting, which provides a flat picture for use in advanced color grading software during editing. This maximizes the potential dynamic range in difficult scenes and image adjustments can be made, as well, to highlight tone, shadow tone, color, and sharpness. When working in F-Log, an updated noise reduction algorithm is available along with 4K inter-frame noise reduction, and the minimum sensitivity has been lowered to ISO 640 to suit working in a broader range of scene types.

Enhanced Autofocus
The X-Processor 4 quad-core CPU inside X-T30 II uses Intelligent Hybrid AF to offer fast, accurate focus in as little as 0.02 sec on any subject, but significant enhancements have been made to track moving subjects, optimizing autofocus for both stills and its powerful 4K/30p video capabilities. Low light focusing performance has also been expanded from the original model, down to -7EV. 425 sensors provide 100% phase detect AF across the frame, with strong face and eye detection AF with new Face Selection option.
Body Design
A bright and clear means for eye-level viewing, a 2.36m-dot OLED electronic viewfinder offers a 0.62x magnification with a fast refresh rate, wide viewing angle, and adjustable diopter settings. The viewfinder remains blackout free while shooting up to the top 30 fps shooting rate, and a unique Sports Finder Mode can also be employed, which highlights a 16.6MP crop area of the sensor in order to allow you to see outside of the image frame.
In addition to the EVF, a rear 3.0" 1.62m-dot LCD touchscreen is available for intuitive live view shooting, playback and review, and settings adjustment and menu navigation. The screen has a two-way tilting design to suit working from high and low angles regardless if shooting with a horizontal or vertical orientation.
The top plate incorporates a series of dials and levers for fast, intuitive control over exposure settings, including a shutter speed dial that offers direct shutter speed adjustment, a mode dial, and an exposure compensation dial to choose +/- 3 EV in 1/3 steps, while a command dial position expands the range to +/- 5 EV for further control.
Front and rear command dials integrate a push function for easier use and settings selection and function buttons can be assigned to control a range of settings.
A dedicated Focus Lever provides faster, more intuitive control over selecting specific focus points while shooting.
Integrated Bluetooth 4.2 low energy allows you to wirelessly share images to a mobile device or use the device to remotely control the camera.
18 Film Simulation and Grain Effect Modes
Taking advantage of FUJIFILM's vast history in traditional film-based photography, the X-T30 II integrates several Film Simulation modes. These customizable modes mimic the look and feel of some of FUJIFILM's classic film types, including Eterna, which copies the look of cinematic film with understated colors and richer shadow tones; Acros, which offers smooth tones, deep blacks, and fine detail; and Classic Chrome, which is designed to deliver muted tones and a deep color reproduction, similar to that of a dated slide film. Several other effects are also available for both monochrome and color shooting. In addition to simulating specific film types, a customizable Grain Effect mode is also available to replicate the look of old film photos with an organic textured appearance, which is especially noticeable when printing.
Bluetooth V4.2 and Wi-Fi Sharing
Use Bluetooth or Wi-Fi to share images with friends and family on social media, by connecting and downloading images to the FUJIFILM Camera Remote App, or instantly connect and print your favorites from any compatible FUJIFILM INSTAX Smartphone printer.
Interval Shooting and Self-Timer
Programmable interval setting allows a preset number of shots, starting time, interval timer, and shooting exposure smoothing for consistent exposures. The selectable self-timer has 2-second or 10-second delay options.

FUJIFILM NP-W126S Li-Ion Battery Pack
For using the maximum power of your mirrorless camera, the FUJIFILM NP-W126S Li-Ion Battery Pack has been designed to better manage heat and ensure lightning fast camera performance. This battery is also compatible with older cameras that use the NP-W126 battery pack, but users will not see any performance advantages in those bodies.

Compatibility
X-H1
X-Pro2
X-Pro1
X-Pro3
X-T3
X-T2
X-T1
X-T30
X-T20
X-T10
X-T100
X-E3
X-E2S
X-E2
X-E1
X-M1
X-A5
X-A3
X-A2
X-A1
X-A10
X100F
FinePix HS50EXR
FinePix HS33EXR
FinePix HS30EXR

UPC: 074101090086
FUJIFILM Body Cap for FUJIFILM X-Mount Cameras
The twist-on Body Cap for FUJIFILM X-Mount Cameras from FUJIFILM fits all FUJIFILM X-Mount cameras and is essential for keeping dust and other objects from entering a compatible camera's lens throat and landing on the sensor when a lens is not mounted.

Key Features
40.2MP APS-C X-Trans CMOS 5 HR Sensor
X-Processor 5 Image Processor
Fujinon 23mm f/2 Lens
35mm Full-Frame Equivalent
6-Stop In-Body Image Stabilization
425-Point Intelligent Hybrid AF System
Hybrid 0.66x OVF with 3.69m-Dot OLED EVF
3.0" 1.62m-Dot Tilting Touchscreen
Bluetooth and Wi-Fi Connectivity
20 Film Simulation Modes with REALA ACE

Timeless Design, Cutting-Edge Tech, Unforgettable Imagery
Having refined the retro styling and ergonomics of the rangefinder-inspired X100-series in its viral fifth iteration, FUJIFILM follows up with the tricked-out black X100VI Mirrorless Camera, filling out the timeless, compact, touch-friendly body with the speed, power, and pixel count of its flagship APS-C sensor-and-processor combo. Featuring unsurpassed design and a wealth of upgraded tech, the X100VI is poised to be the every day, everywhere darling of photographers who yearn to transform the mundane into the magical.

40MP X-Trans CMOS 5 HR Sensor, X-Processor 5
The high-resolution 40.2MP X-Trans CMOS 5 HR sensor has an enhanced image-processing algorithm that boosts resolution without compromising the signal-to-noise ratio, delivering astonishing image quality. This sensor has an improved pixel structure, allowing light to be received more efficiently. Partner to the newly designed sensor is a fresh engine X-Processor 5-which uses 64-bit processing to realize 3x faster speeds for both video and photo tasks. The combination of this high-resolution sensor and processor achieves remarkably fast operation, wide dynamic range, and incredible photo quality, even at higher ISO sensitivities.

Powerful Video Capabilities
The powerful video function afforded by the sensor-processor combo means movies can be recorded internally at up to 6.2K at 30p in 10-bit color, along with a 4K HQ mode which oversamples 6.2K footage for superior 4K output. Higher frame rate videos, at 4K 60p or FHD 240p, are also available.

In-Body Image Stabilization, Improved Autofocus
The upgraded sensor-processor combination allows the X100VI to be the first in the series to feature in-body image stabilization. The five-axis sensor-shift IBIS helps to minimize the appearance of camera shake by up to six stops. The improved processing also benefits autofocus performance, producing a faster, more intelligent hybrid focusing system using 425 phase-detection points. Backed by deep learning, an AI adaptive algorithm means this focusing system is better suited to automatically detect and track a variety of subject types, ensuring the magic moment is never missed.

Built for Speed, Built for the Street
Further benefiting street photographers, the X100VI is ready for action, no matter how fast the subject is moving. A top electronic shutter speed of 1/180,000 sec and a maximum mechanical shutter speed of 1/4000 sec will stop any subject in its tracks. Keep your finger down, and the X100VI records images at up to 20 fps with the electronic shutter at a 1.29x crop and 11 fps with the mechanical shutter.

Fujinon 23mm f/2 Lens
Updated in the fifth generation, the camera's Fujinon 23mm f/2 lens features a revised optical design that includes two aspherical elements for improved sharpness and clarity through the reduction of spherical aberrations and distortion. With a 35mm full-frame equivalency, the lens' bright f/2 design handles low-light conditions and affords a shallow depth of field. When it's bright, the built-in 4-stop ND filter can also be used for more control over your exposures and to better enable working with shallow depth of field. While the lens has a fixed focal length, the X100VI integrates 1.4x and 2x digital teleconverter settings to simulate the look of working with longer focal lengths of 49mm and 70mm, respectively.

Advanced Hybrid Viewfinder
Both optical and electronic viewfinder types are incorporated into the unique Advanced Hybrid Viewfinder, which lets you select from the simplicity and familiarity of an OVF as well as the versatility of an EVF. The optical viewfinder provides a clear, lifelike view of the scene for easier composition and subject tracking. Its enhanced design incorporates an Electronic Rangefinder function, which mimics the functionality of a mechanical rangefinder, and simultaneously overlays information from the electronic viewfinder on top of the optical viewfinder for comparative manual focus control.

Film Simulation Modes
Film Simulation modes allow you to reproduce the look and feel of several of FUJIFILM's film types. The X100VI boasts FUJIFILM's latest recipe-REALA ACE-and also includes 19 other modes, including Provia, Velvia, Astia, Classic Chrome, PRO Neg. Std, PRO Neg. Hi, Classic Neg., Nostalgic Neg., Eterna Cinema, Eterna Bleach Bypass, Acros, Acros + Ye Filter, Acros + R Filter, Acros + G Filter, Black & White, Black & White + Ye Filter, Black & White + R Filter, Black & White + G Filter, and Sepia.
In addition to simulating specific film types, a Grain Effect mode is also available to replicate the look of old film photos with an organic textured appearance, which is especially noticeable when printing. Color Chrome and Color Chrome Blue effects are also available to deepen color, tonal response, and gradation with higher saturation colors.

Frame.io Camera-to-Cloud integration
Deliver photos or video straight to the cloud moments after they're created with the first accessory-free integration for Frame.io Camera to Cloud. Use the camera's built-in Wi-Fi or Ethernet LAN connection to connect to Frame.io and deliver hi-res raw or JPEG images, send h.264 video proxies, or upload video securely for review.

Body Design
With the same 5 x 3 x 2.1" dimensions as its predecessor, it weighs just 1.5 oz more for a portable 1.1 lb total weight.
The tilting 3.0" 1.62m-dot LCD has a touchscreen design for intuitive operation and playback.
The durable design can be made weather-resistant when paired with the optional AR-X100 Adapter Ring and optional weather-sealing protection ring.
The top plate incorporates a series of locking dials and levers for fast, intuitive control over exposure settings, including dials for shutter speed and exposure compensation.
Front and rear command dials integrate a push function for easier use and settings selection.
The rear joystick is available for intuitive selecting and switching of AF points as well as menu navigation and image playback.
Integrated Bluetooth and Wi-Fi connectivity allow for wirelessly sharing images to a mobile device or to use the device to remotely control the camera.
Single SD memory card slot supports up to the UHS-I standard.
Included NP-W126S battery provides approximately 310 frames per charge when working with the EVF or 450 frames per charge when working with the OVF.

Godox TT685II Overview

A Guide to On-Camera Flash


Offering full support for Canon E-TTL / E-TTL II and a built-in 2.4 GHz radio system, the Godox TT685C II Flash makes it easy to create both simple and elaborate lighting setups. A powerful and effective lighting tool, this flash features a powerful guide number of 197' at ISO 100 with a zoom range of 20-200mm. The TT685C II operates as a full wireless master or slave unit with TTL functionality, and for maximum versatility this updated unit tilts from -7 to 120° and rotates 330°, giving you more flexible flash angles and a more efficient lighting setup process. Also featured is a new and unique TCM (TTL Converted to Manual) function, which allows for instant conversion from TTL to manual mode. This function helps you lock the proper exposure value and is useful for quickly determining a good starting point for setting external flash units in manual mode. For ease of use, an easy-to-read rear LCD panel illuminates your flash settings, and the flash includes a 2.5mm sync port for basic wired connectivity.