Key Features
For FUJIFILM INSTAX Wide Format Cameras
ISO 800/30°
Daylight-Balanced Film
Glossy Surface Type
Vibrant Colors and Natural Skin Tones
Excellent Sharpness and Grain Structure
This twin pack of FUJIFILM INSTAX Wide Instant Film contains 20 sheets of instant color film that is compatible for use with the FUJIFILM INSTAX Wide series of cameras. This film features vivid color reproduction with natural skin tones when used under daylight (5500K) or electronic flash lighting conditions. A refined grain structure provides high image sharpness and clarity as well as a versatile ISO 800 film speed for use with a wide variety of subjects. Each sheet of film produces a 2.4 x 3.9" glossy image area that is surrounded by a simple white border.

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-C Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon, FUJIFILM, Nikon, and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS M6
EOS 6D
EOS 5D Mark IV
EOS 5D Mark III
EOS 5D Mark II
EOS 5Ds
EOS 5Dsr
Rebel XT1 / 400D

FUJIFILM:
GFX 100S
GFX 50R
GFX 50S II
GFX 50 S
X-T30 II
X-Pro3
X-T3

NIKON:
Df
D750
D780
D850
D810
D810A
D800
D610
D500
D7500
D7200
D5600
D5300
D3500

SONY:
a7
a7R

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-S Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Nikon and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
SONY:
a1
a7 II
a7 III
a7M II
a7M III
a7R II
a7R III
a7R IV
a7S II
a9
a9 II
a6600
a6400
a6300

NIKON:
Z6 II
Z6
Z7 II
Z7
Zfc
Z5
Z50
D3400

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-SG Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera, and features a cut-out slot to accommodate movement of the camera's flip-out LCD screen. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS R
EOS R5
EOS R6
EOS M50

SONY:
a7 IV
a7C
a7S III

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 63mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-63 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select Sony mirrorless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-63 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-63 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-63 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 63mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 63mm.

The Wizard W-63 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
a1
a9 II
a9
a7 IV
a7 III
a7 II
a7
a7R V
a7R IV
a7R III
a7R II
a7R
a7S III
a7S II
a7
a6600
a6500
a6400
a6300
a6100
a6000
FX3
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Bluetooth connection to the New NiSi ND Calculator app
Start and stop the exposure using our app
Auto power off if the Bluetooth connection has been idle for 30 minutes
32 ft Working Range (10 meters)
Works with the new NiSi ND Calculator App for Android and Apple
Replaceable CR2032 type of battery

Quickly print wirelessly from Smart devices with the app Canon PRINT, MopriaTM, Apple AirPrintTM and the Wi-Fi button
Fine prints
Create and share extraordinary printed images in no time
Small and compact
SELPHY CP1300 White Compact Photo Printer, Card Drawer (Card Size), Compact AC-CP200 B Adapter, CA Cable, User Manual Kit

Canon PF-10 Print Head Technology that enables the maximum 2400X1200 dpi high resolution
The Canon PF-10 print head high-precision print heads are manufactured by utilizing the latest semiconductor manufacturing technology to provide an integrated nozzle design.

The Canon ink ejection technology achieves size uniformity of 4pl micro fine droplet and droplet placement accuracy. FINE achieves the essential elements for large format printing with high quality such as 2400 x 1200 dpi high-resolution, smoother gradation, and reduction of graininess. At the same time, its high-drive frequency also contributes to high-speed printing.

Compatible with the following printers:

Canon imagePROGRAF PRO-2000
Canon imagePROGRAF PRO-2100
Canon imagePROGRAF PRO-4000
Canon imagePROGRAF PRO-4000S
Canon imagePROGRAF PRO-4100
Canon imagePROGRAF PRO-4100S
Canon imagePROGRAF PRO-6000
Canon imagePROGRAF PRO-6100

240gms, 100 Sheets, 152x203 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 100 Sheets, 152x203 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 20 Sheets, 210X297 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 100 Sheets, 210x297 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 20 Sheets, 297x420 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

240gms, 20 Sheets, 297x420 mm
RC Inkjet Premium Photo Paper
Rich color
Printer compatibility & Good stability

Printing method
Dye-sublimation thermal transfer (D2T2)

Foot print
0.10 m2

Line-up of consumables*1
Standard Print : 5”×7”, 6”×8”
Sticker Print : 6”×8”

Print size*2
Standard Print : 3.5”×5”,5”×5”, 5”×7”, 4”×6”, 6”×6”, 6”×8”
Sticker Print : 4”×6”, 6”×8”

Surface finish*3
Glossy type, Matte type

Ribbon finish
Yellow, Magenta, Cyan and Overcoat

Printing resolution*4
300×300 dpi (Standard mode),
300×600 dpi (High Quality mode)

Operation for paper exchange
Semi-Auto Loading

Printer life
200,000 prints (Standard 4”×6”)

Number of prints
Standard 3.5”×5”: 460 sheets, 5”×7”: 230 sheets in 1 roll
Standard 4”×6”: 400 sheets, 6”×8”: 200 sheets in 1 roll
Sticker 4”×6”: 400 sheets, 6”×8”: 200 sheets in 1 roll

Print speed*5
Standard 3.5”×5” : approx. 7.6 sec (Glossy type, Standard mode)
Standard 4”×6” : approx. 8.4 sec (Glossy type, Standard mode)
Sticker 4”×6”: approx. 13.0 sec (Glossy type, High Quality mode)

Dimensions (W×D×H)
10.8”×14.4”×6.7” (275 mm×366 mm×170 mm)

Weight
approx. 12 kg (26.4 lb)

Interface
USB 2.0 Type B connector

Power supply
100V-240V 50 / 60 Hz

Driver software*6
Windows 7 / Windows 10 (32 bit / 64 bit)

*1 printer memorizes the consumable type (sticker or standard) which is first loaded into the printer and then the printer accepts only the same type of consumables.
*2 Sticker/Standard can uses 6”×8” ribbon and divide it to 4”×6”×2 prints. Standard can uses 5”×7” ribbon and divide it to 3.5”×5”×2 prints.
*3 Both are available with one media. Sticker media is limited to Glossy type.
*4 Stickers can be printed in High Quality mode only.
*5 Does not including data processing/transferring time and paper initialization/paper feed times. In case of using the function of ribbon rewind.
*6 Windows 7 is only guaranteed to work(not be subject to future version upgrades or quality assurance) because Windows7 is not supported by Microsoft Corporation. Windows 7, Windows 10 are registered trademarks of Microsoft Corporation in the United States and other countries.

Compatible with FUJIFILM ASK-400 printer
High-quality 152mm×203mm (6x8) paper
Ample quantity of 68 sheets
Effortless and reliable printing experience
Ideal size for impactful prints
Introducing the FUJIFILM ASK-400, a powerful media set designed to enhance your printing experience. With the ASK-400 MEDIA SET, you can expect top-notch quality and performance for your photo printing needs. This media set includes 68 sheets of high-quality 152mm×203mm (6x8) paper, allowing you to create stunning prints with ease.

P2R BF-SP
Bleach-Fix and Replenisher
To make: 4X10L
Packaging size: 31X20X25
Temperature: 38+-0.3 C
Time: 45 Second
Replenishment Rate: 108 ml/m2 @37.8 C
Replenishment Rate: 215 ml/m2 @35 C
Cat Number: 680208
Replenisher solution: Water 8L + P2R BF-SP (2L) = 10L
Working solution: Water 8L + P2R BF-SP (2L) = 10L

RC INKJET PHOTO PAPER
Brilliant Image Quality
Microporous Coating
Suitable for Desktop Printers
Highly Water Resistant
260g/m2 Grammage
Glossy
Size: 8X6 INCH (152X203mm)
Sheets: 100