Key Features
For EX Camera Stabilizer
Extension Arm for Separate Grip
Enables Underslung Position
1/4"-20 & 3/8"-16 Accessory Threads
The Extension Bracket Holder enables you to use an underslung position when used with a separate grip or tripod and your Sirui EX Camera Stabilizer. This aluminum bracket features a quick release design, a rotating base, and both 1/4"-20 and 3/8"-16 accessory threads.

- Maximum height: 213cm
- Load capacity: 2kg
- Base width: 100cm
- Weight: 1.4kg

Product Details
Weight: 72g
Closed Length: 270mm
Minimum Height: 105mm
Maximum Height (Ex. Column Retracted): 380mm
Maximum Load: 10kg (head 6kg)
Tube Size: 22/19/17
Leg Sections: 3
Leg Lock Type: Twist-Lock
Independent Leg Spread: Yes – 3 stops
Foot Mount: UNC 3/8-16
Foot Type: Removable Rubber
Item Includes: Carry Case, Strap, Spikes & Toolkit

Category: Ranger series

حامل اضاءة معدني مع ذراع افقي

- Maximum height: 240cm
- Load capacity: 2kg
- Base width: 92cm
- Weight: 1.3kg

- Adjustable sliding arm
- Stable base with braking wheels
- Max. height of 7.9'
- Min. height of 3.9'

- Maximum height: 300cm
- Load capacity: 3kg
- Weight: 1.7kg

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The black Sirui 3T-35K Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Key Features
Load Capacity: 8.8 lb
Max Height: 13.4"
Min Height: 4.5"
Folded Length: 9.5"
Leg Sections: 1
Weight: 15.2 oz
Removable, Extendable Center Column
Arca-Type Compatible Ball Head
Quick-Release Plate
Doubles as Handheld Pole
The red Sirui 3T-35R Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Key Features
Compatible with Sony and Canon Cameras
Wireless Bluetooth Communication
Bluetooth Receiver
Detachable Remote Commander
Accessory Port
Aluminum Construction
The 3T-R Table Tripod Remote Control Tripod from Sirui is compatible with Sony and Canon cameras and is designed as an effective solution for vloggers.

Bluetooth Receiver
There is a Bluetooth receiver attached to the back of the tripod, which is specially designed for those Sony cameras that have no native Bluetooth. Insert the receiver into the multi-terminal of the camera and pair the two devices. After paired successfully, the camera can be controlled directly via the remote commander.
Detachable Remote Commander
The tripod features a detachable remote commander. The commander can control the camera within 33' to perform such functions as shooting, focusing, zooming, and more.
Two-ln-One Design
Fold up the legs to use as a grip or spread them to use as a tripod.
Quick Release System
A quick release plate is designed for mounting cameras in a quick and simple way.
Accessory Port
A variety of accessories can be connected to the tripod via the 1/4"-20 screw port to form a powerful setup.
Versatility
The grip is smoothly contoured for added comfort. There are built-in magnets in each of the legs, preventing them from opening. In addition, the legs have rubber feet to guarantee a firm hold on the ground.

- Maximum height: 422cm
- Load capacity: 5kg
- Weight: 4.3kg

Key Features
Load Capacity: 22 lb
Maximum Height: 55.1"
Minimum Height: 10.2"
Folded Length: 14"
Leg Sections: 5
Weight: 2.7 lb
Aluminum Legs
180° Reverse-Folding Legs
Detachable Monopod Leg
Y-10 Ball Head
The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a compact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

The ALTA BH-300 ball head is a multi-action ball head with precision control. With a carrying capacity of 30kg/66lbs you can bet your gear on top will remain rock steady. This ball head has a separate locking knob, friction knob and panning knob allowing the unit to adjust to your working style.

Never Waver – 4 Independent lock knobs (Easy Grip Main ball lock, panning lock knob, camera QS lock knob, friction control lock knob)
Rapid Intuitive Positioning- Set up your shot in seconds
Robust Build Construction- Made from lightweight aircraft aluminum which provides long-lasting performance
Precision Alignment- Dual bubble levels allow for easy quick fine-tuning and seamless positioning
Quick Shoe Safe- Uses an “Arca-Swiss” quick release system with a built-in retractable safety pin positioned on the top of the mounting plate of the head. Double security for your valuable equipment
Quick Shoe- QS-60V2 38mm universal Arca compatible plate. Compatible with all Vanguard BH series Ball heads and many other heads.
Ball Head Base- 67mm base and includes dual 3/8” to 1/4” reducing bushing

Vanguard's ALTA GH-100 Pistol-Grip Ballhead combines impressive ergonomic control with a precise, smooth ball head. With a safe payload capacity of 6 kg/13.2 lbs, this lightweight pistol grip allows you to lock, unlock, and reposition your gear comfortably with one hand, leaving your other hand free to make lens adjustments.

Never waver – Pistol grip provides secure one-handed operation of head controls
Versatile – Outstanding for still photography, videography or even surveillance
Control– Friction Control System allows you to control the level of friction on the ball to accommodate changing equipment weight and to control weight balance
Robustness – Magnesium alloy construction for lightweight and long-lasting performance
Precise – 72 built-in click stops, Bubble level for precise panoramic photo and videography
Custom fit - 8-stop Handle positioning for superior ergonomics
Smooth – Anodized center ball allows for extremely fluid movement without sacrificing precise control
Optimum load performance – 6kg (13.2 lbs) safety payload for multi-gear options
Safe – Arca-type quick release system & Dual-locking quick shoe mechanism
Pan Head Base – 58mm with 3/8 to ¼ reducer bushing

The ALTA PH-114V is a lightweight video head with fluid action movements, incorporates an Arca-type quick release system and has an ergonomic long handle for smooth pans and tilts.

Lightweight Magnesium alloy construction provides long-lasting performance and durability
Fluid action movements
Ergonomic long handle for smooth pans and tilts
Bubble level for precise leveling
High working load performance 17.6lbs./8kg
Arca-type quick release system with a built-in safety pin
58mm Pan Head Base
Easily Connects to all types of tripods using the 3/8”-16 receiver

Alta Pro 2+ 264CT is a lightweight, 26mm, 4 section Carbon Fiber Tripod with max pay load of up to 7 Kg/15.5 lbs. Featuring our unique MACC (Multi-Angle Center Column) it can be positioned at almost any angle from negative to positive thus offering ultimate freedom of creativity.

Rapid action - intuitive set-up in a matter of seconds
Unique Perspective - MACC (Multi-Angle Center Column) for limitless shooting angle
Never waver - firm hexagonal center column
Position versatility - 4 section legs with 4 position angles - 20°, 40°, 60°,80°
Robust – Carbon Fiber for lightweight and long-lasting performances
Rock Solid positioning - unique “locked” “unlocked” Twist-Lock system
Level headed - bubble level control
High work load performance - up to 7 Kg/15.5 lbs, for multi gear options
Extra Stability - canopy suspension loop for counterbalance weight
Alta Link - 3/8 thread bonus connection for any accessory: reflector, articulated or flexible arms, and much more
Grip and go - non-slip, all-weather TPU grips on 2 legs
Firm on your feet - angled rubber feet to match any terrain (spiked feet available to be purchased separately)
Bag it – bonus tripod bag with shoulder strap included

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1004K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1004K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1004K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Ball head included
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. Furthermore, it has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Best quality aluminum in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 2,0kg
- Max. Load capacity: 12kg
- Material: Aluminium

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. load capacity: 20kg - Packing size: 20kg Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1004K tripod/monopod Alu
1x SIRUI K-10X ball head Alu with interchangeable plate
3x metal spikes
1x carrying bag

Allround tripod with ball head
If you are looking for a compact allround tripod, you will be happy with the SIRUI AM-1204K. With its powerful ball head K-10X and the integrated monopod, the small tripod offers everything a photographer needs. Whether in the bustling city, exploring exciting landscapes, on travels or in the home studio, the AM-1204K is reliably at your side. And the 48 cm pack size turns into a tripod up to 169 cm tall.

Turn tripod into monopod
One leg of the tripod can be removed and used as an independent monopod. This feature turns the AM-1204K into a 2in1 tripod that will have you ready for any situation. If that's not enough, you can even extend the monopod with the center column to an incredible 173 cm working height (with head).

If you prefer it low, you can also mount the center column upside down. Your camera has never been closer to the ground!

Stability and intuitive operability
With its non-slip rubber feet and the included metal spikes, the tripod stands securely on any surface. For more stability, the load hook on the center column can be loaded with e.g. a backpack. The 4 leg sections can be loosened and locked again in no time via the turn locks (ring locks). Thanks to the two soft foam rubber handles, you always have a secure grip on your tripod. In winter, they also serve as protection against the cold.

Compact pack size
The proven 180° folding function of the legs also makes this SIRUI tripod a true packing miracle. The AM-1004 measures just 48 cm when packed. The ball head is completely enclosed.

Including ball head K-10X
It is equipped with the Safety Lock System against accidental slipping of the interchangeable plate. It also has a leveling bubble and a 360° panoramic scale. It is compatible with the Arca Swiss system.

Features
- Monopod integrated
- Carbon 8-layer in 4 sections
- Reversible 1/4" and 3/8" screw for tripod heads or camera
- Fixation screw for tripod head
- Center column protected against twisting
- Accessory connection 1/4" for microphone, light etc.
- Legs can be folded upwards by 180°
- Sealed twist locks ensure a firm hold
- Stabilizing hooks and cold protection handles

Technical data tripod including ball head
- Min. height with centre column: 500mm
- Height without centre column: 620mm
- Max. Height with center column: 1693mm
- Height of insertion tripod: 500-173mm
- Pack size: 480mm
- Tube diameter: 15 - 26mm
- Weight: 1.68kg
- Max. Load capacity: 12kg
- Material: Carbon

Technical data ball head
- Weight: 0,35kg
- Height: 93mm
- Ball diameter: 33mm
- Base diameter: 49mm
- Max. Load capacity: 20kg
- 3 levelling bubbles and safety pin
- Incl. interchangeable plate (Arca Swiss compatible)
- Material: aluminium

Scope of delivery
1x SIRUI AM-1204K tripod/monopod carbon
1x SIRUI K-10X ball head aluminium with interchangeable plate
3x metal spikes
1x carrying bag

Key Features
Lock Lever
Anti-Slip Stainless Steel Ball
2 x 1/4"-20 Stainless Steel Screws
Load Capacity: 4.4 lb
Length: 5"
Compatible with select tripods, super clamps, cages, smartphone mounts, and more, the 5" Leofoto AM-2 Versa Arm allows you to connect two items that utilize 1/4"-20 mounting threads. It features a lock lever and anti-slip stainless steel ball, and the arm is rated to hold 4 lb.

Extreme lightness and very high stability combined in the AM2 series tripods
The tripods of the SIRUI AM2 series with their full equipment and compact dimensions are the ideal introduction to professional photography. Here innovative design meets ergonomic functionality. They are always a loyal and reliable companion for the ambitious and professional photographer.

The ideal tripod to have with you at all times: super compact and light but still extremely stable carbon tripod.

The legs are made of 10-ply carbon fibre, which activates three factors:
1. lightness
2. vibration resistance
3. temperature neutrality

The strong ball head also holds DSLR cameras effortlessly.

- Compact tripod with ball head
- Two leg positions for normal or extremely low working height
- Non-slip feet with rubber coating and screw-in stainless steel spikes
- 1/4" accessory connection for flexi arms, microphones etc.
- High quality ball head with quick release lever for extra strong hold
- Safety Lock System to prevent accidental slipping of the camera
- 360° rotation with scale in 10° steps
- Aluminium of best quality

Technical Data Tripod AM-225
- Height: 6 - 119,5cm
- Height (with head): 13,5 - 126,8cm
- Height when folded: 39,5cm
- Height when folded (with head): 46,5cm
- Sections: 5
- Tube diameter: 10-22mm
- Weight: 0,72kg
- Weight (with head): 0,94kg
- Max. Load capacity: 6kg
- Material: 10x Carbon
- Colour: black

Technical data ball head B-00K
- Height: 70mm
- Ball diameter: 29mm
- Base diameter: 41mm
- Weight: 0,21kg
- Max. Max. load: 10kg
- Material: aluminium
- Colour: black

Scope of delivery
1x SIRUI AM-225 tripod Carbon
1x SIRUI B-00K ball head aluminium
1x SIRUI TY-C10 quick release plate aluminium
3x stainless steel spikes
1x snap hook
1x transport bag
*Camera not included