Product Details
Weight: 72g
Closed Length: 270mm
Minimum Height: 105mm
Maximum Height (Ex. Column Retracted): 380mm
Maximum Load: 10kg (head 6kg)
Tube Size: 22/19/17
Leg Sections: 3
Leg Lock Type: Twist-Lock
Independent Leg Spread: Yes – 3 stops
Foot Mount: UNC 3/8-16
Foot Type: Removable Rubber
Item Includes: Carry Case, Strap, Spikes & Toolkit
The smallest and lightweightest carbon tripod in the Ranger family of travel stands. This ultra-compact table tripod is very light and compact, fitting easily into every photo bag or larger pocket. The Leofoto LS-223C tripod comes with ultra-compact Leofoto LH-25 headset, carry case, multi-tool and set of stainless steel spikes.

Key Features
40MP APS-C X-Trans5 BSI Sensor
7-Stop In-Body Image Stabilization
8K 30p, 4K 60p, FHD 240p 10-Bit Video
5.76m-Dot OLED Electronic Viewfinder
160MP Pixel Shift Multi-Shot
20 fps E-Shutter, 15 fps Mech. Shutter
CFexpress Type B & SD UHS-II Card Slots
ProRes Raw, Blackmagic Raw via HDMI
Intelligent Hybrid Autofocus

FUJIFILM X-H2: Life in Detail
Pushing the boundaries of APS-C imaging, the FUJIFILM X-H2 is a high-resolution mirrorless crop-sensor camera featuring a groundbreaking 40MP BSI sensor and an arsenal of cutting-edge features packed into a small and durable X-series body. Standing atop the X-System lineup, this high performing camera inherits many of the GFX system's advances in digital capture technology to provide image quality, detail, and color rendition never before seen in a crop-sensor camera, while retaining its characteristic compact form factor and sleek design that has garnered the X-System a loyal following worldwide.
Ideal for architectural, travel, and landscape photographers, the X-H2 sports a backside-illuminated, APS-C-format 40MP X-Trans 5 HR sensor, which ups the resolution and improves low-light performance compared to previous generations. First, as an X-Trans sensor, it uses the unique color filter array that inherently minimizes moiré and contributes to more natural color rendering; next, the BSI design helps reduce noise and improve tonality and clarity; and, finally, the design greatly reduces rolling shutter and other motion distortion to better suit high-speed video and photo applications. The remarkable resolution allows for 2x digital zoom and has up to 13 stops of dynamic range.
Partner to the newly designed sensor is a fresh engine—the X-Processor 5—which uses 64-bit processing to realize 3x faster speeds for both video and photo tasks compared to the X-T4. On the video side, this enables recording at bit rates of up to 720 mb/s.
On the stills end, this quick processing means faster shooting to suit photographing moving subjects. When working with an electronic shutter, shooting at up to 20 fps is possible, with a buffer of 202 consecutive uncompressed raw frames. With the mechanical shutter, shooting speeds of up to 15 fps are possible, along with the ability to shoot upwards of 1000 raw frames in a single burst.

Benefitting both video and stills applications, this processing also benefits the sophisticated and AI-backed autofocus system, helps achieve a 14-stop dynamic range, and enables an enhanced sensitivity range from ISO 125-12800.

Vanguard's ALTA GH-100 Pistol-Grip Ballhead combines impressive ergonomic control with a precise, smooth ball head. With a safe payload capacity of 6 kg/13.2 lbs, this lightweight pistol grip allows you to lock, unlock, and reposition your gear comfortably with one hand, leaving your other hand free to make lens adjustments.

Never waver – Pistol grip provides secure one-handed operation of head controls
Versatile – Outstanding for still photography, videography or even surveillance
Control– Friction Control System allows you to control the level of friction on the ball to accommodate changing equipment weight and to control weight balance
Robustness – Magnesium alloy construction for lightweight and long-lasting performance
Precise – 72 built-in click stops, Bubble level for precise panoramic photo and videography
Custom fit - 8-stop Handle positioning for superior ergonomics
Smooth – Anodized center ball allows for extremely fluid movement without sacrificing precise control
Optimum load performance – 6kg (13.2 lbs) safety payload for multi-gear options
Safe – Arca-type quick release system & Dual-locking quick shoe mechanism
Pan Head Base – 58mm with 3/8 to ¼ reducer bushing

Product Details
Weight: 72g
Closed Length: 270mm
Minimum Height: 105mm
Maximum Height (Ex. Column Retracted): 380mm
Maximum Load: 10kg (head 6kg)
Tube Size: 22/19/17
Leg Sections: 3
Leg Lock Type: Twist-Lock
Independent Leg Spread: Yes – 3 stops
Foot Mount: UNC 3/8-16
Foot Type: Removable Rubber
Item Includes: Carry Case, Strap, Spikes & Toolkit

Category: Ranger series

About this item
Leofoto MC-30 +MBH-19+PC-90 II Phone Outdoor Multipurpose Clamp Kit
leofoto MC-30 Phone Outdoor Multipurpose Clamp: Locking diameter: 31mm Mounting screw/hole: UNC 1/4" Weight: 72.5g Max. load: 2kg
MBH-19: Super Solid Micro Ball Head Max load: 2kg (4.4lbs) 1/4" Top & Bottom Thread
Leofoto PC-90 II Phone Holder Arca Stand Adjustable Locking Width Phone Clip

The wood-colored Leofoto MT-01 + LH-25 kit Wood consists of the Leofoto MT-01 mini tripod and the LH-25 tripod head. Both components of this tripod are finished in a light wood color for a high degree of unobtrusiveness when used in the field. This ultra-compact but at the same time extremely strong mini tripod offers maximum ease of use while still being able to handle a huge weight. This high-quality aluminum tripod combination weighs only 340 grams including ball head and can carry up to 6 kilograms. Nice all-round, super solid and yet compact to carry!

Skip to the end of the images gallery
Skip to the beginning of the images gallery
Details

Leofoto MT-01 with LH-25 Mini table tripod kit Wood
The wood-colored Leofoto MT-01 + LH-25 kit Wood consists of the Leofoto MT-01 mini tripod and the LH-25 tripod head. Both components of this tripod are finished in a light wood color for a high degree of unobtrusiveness when used in the field. This ultra-compact but at the same time extremely strong mini tripod offers maximum ease of use while still being able to handle a huge weight. This high-quality aluminum tripod combination weighs only 340 grams including ball head and can carry up to 6 kilograms. Nice all-round, super solid and yet compact to carry!

Light and strong tripod
The Leofoto MT-01 mini tripod is made of high quality, hardened aircraft aluminum and has a black anodized body, ensuring a very strong yet light tripod. The minimum working height with tripod head is 114 centimeters and when folded, this mini tripod measures only 22 centimeters including the head, so it fits easily into any photo bag. The load capacity of the Leofoto MT-01 mini tripod without ball head is an impressive 6 kilograms if you fold out the legs completely and screw the camera directly onto the tripod using the 1/4-inch tripod screw. The tripod legs are finished with a wood-colored finish that allows the tripod to fully blend into its surroundings. The legs have rubber feet for maximum grip on any surface. This makes it a real little powerhouse suitable for use with a wide variety of camera/lens combinations.

Compact LH-25 tripod head
The ultra-compact but extremely strong Leofoto LH-25 ball head is included in the kit with the MT-01 mini tripod. This small ball head is only 6.9 centimeters high and made of black anodized aircraft aluminum for great durability. Thanks to the professional PU-25 Arca-Swiss quick-release plate, you can mount your camera on this tripod head in no time. With the adjustment wing on the side of the head you control the horizontal adjustment of the entire head, which can rotate 360 degrees. Thanks to the notch under the ball you can quickly switch from landscape to portrait mode! You do this simply by pulling the wing forward and adjusting the position. The load capacity of this tripod head is 6 kilos and the ballhead itself weighs just 172 grams.

Specifications
Questions (

Extreme lightness and very high stability combined in the AM2 series tripods
The tripods of the SIRUI AM2 series with their full equipment and compact dimensions are the ideal introduction to professional photography. Here innovative design meets ergonomic functionality. They are always a loyal and reliable companion for the ambitious and professional photographer.

The ideal tripod to have with you at all times: super compact and light but still extremely stable carbon tripod.

The legs are made of 10-ply carbon fibre, which activates three factors:
1. lightness
2. vibration resistance
3. temperature neutrality

The strong ball head also holds DSLR cameras effortlessly.

- Compact tripod with ball head
- Two leg positions for normal or extremely low working height
- Non-slip feet with rubber coating and screw-in stainless steel spikes
- 1/4" accessory connection for flexi arms, microphones etc.
- High quality ball head with quick release lever for extra strong hold
- Safety Lock System to prevent accidental slipping of the camera
- 360° rotation with scale in 10° steps
- Aluminium of best quality

Technical Data Tripod AM-225
- Height: 6 - 119,5cm
- Height (with head): 13,5 - 126,8cm
- Height when folded: 39,5cm
- Height when folded (with head): 46,5cm
- Sections: 5
- Tube diameter: 10-22mm
- Weight: 0,72kg
- Weight (with head): 0,94kg
- Max. Load capacity: 6kg
- Material: 10x Carbon
- Colour: black

Technical data ball head B-00K
- Height: 70mm
- Ball diameter: 29mm
- Base diameter: 41mm
- Weight: 0,21kg
- Max. Max. load: 10kg
- Material: aluminium
- Colour: black

Scope of delivery
1x SIRUI AM-225 tripod Carbon
1x SIRUI B-00K ball head aluminium
1x SIRUI TY-C10 quick release plate aluminium
3x stainless steel spikes
1x snap hook
1x transport bag
*Camera not included

Key Features
Covers Micro Four Thirds/APS-C Sensors
Suitable for 4K Image Capture
2.4:1 De-Squeezed Format; 8-Blade Iris
Schott Optical Glass with Nano Coatings
Blue Streak Effects; Less Stray Light
Just under 2' Minimum Focus
Focus Scales in Feet & Meters
72mm Filter Thread
This 24mm f/2.8 Anamorphic 1.33x Lens from Sirui, in a Fujifilm X mount, brings a wide-angle feel to your anamorphic imagery, in addition to the extra width provided by the anamorphic process. Designed for MFT/APS-C cameras with a Fujifilm X mount, the lens increases the horizontal FOV by 33% compared with traditional 24mm APS-C lenses. After de-squeezing, the captured image is displayed in a 2.4:1 format in a 16:9 setting. Lightweight and portable, the f/2.8 lens is designed with an aluminum housing and features optics with multilayer nano coatings.

Made with renowned Schott optical glass lens elements, it produces rectangular aspect ratios, long horizontal lens flares, and oval bokeh. One of the exciting features of this lens is the close focus distance of just under 2', allowing you to get close focus for creative effects. Focus scales marked in both feet and meters makes this well suited for users around the world, and the 72mm filter thread is a popular filter size for adding filters to your lens.

Features
A robust lens with advanced optics for compact MFT/APS-C cameras
33% horizontal field of view increase over standard 24mm lenses
Anamorphic 2.4:1 de-squeezed format in 16:9
Multi nano-coated Schott optical glass
Horizontal blue streak effects
8 aperture blades produce oval bokeh
1.97' minimum focusing distance
Focus scales in feet and meters
72mm filter thread
Durable lens housing

Perfect Travel Tripod
Reverse-Folding Legs
Removable Center Column for Low-Angles
Arca-Type Compatible QR Plate
Includes Soft Case and Tools
Weighs only 1kg
The Sirui Traveler 5A Aluminium Tripod with 3T-35 Ball Head – small and compact, yet extremely stable.

This high-quality travel tripod from SIRUI offer secure support for your compact or system camera despite its compact design. It is easy to handle in any situation and can be packed into any bag. The legs can be folded up by 180° meaning that the tripod can be collapsed to a height of just 33cm. Each leg is made of 5 sections with 4 sealed twist locks. The rubber feet ensure the tripod is steady on all surfaces. Cold-weather grips are a SIRUI standard offering control in cold weather environments. The Traveler 5 Series features a removable centre column. The head can also be mounted directly onto the tripod shoulder, increasing stability. For additional stability, there is a small keyring with a carabiner underneath the tripod shoulders so you can mount additional weight.

Tripod specifications (Including Head)
• Material: Aluminium
• Extendible and removable centre column
• Reversible 1/4 inch and 3/8 inch screw for tripod heads or camera
• Legs fold up by 180°
• Sealed twist locks for secure support
• Carabiner for stabilising and cold weather grips
• Max. load: 4kg
• Height range – 15.5cm – 138cm
• Closed size: 33cm
• Tube diameter: 10 – 22mm
• Weight: 1kg
– Colour: black

Ball head specifications
– Material: Aluminium
– 360° panorama function – infinitely variable friction control
– Rubber release plate – size: 30x38mm
– Release plate with 1/4″ stainless steel screw – head with 3/8″ thread
– Safety Lock System – prevents the plate from accidentally slipping
– Vertical slot
– Max. load: 4kg
– Height: 70mm
– Base plate: ø37mm
– Weight: 172g (including plate)
– Colour: black

Included
1x SIRUI Traveler 5A tripod aluminium black
1x SIRUI 3T-35K ball head black
1x SIRUI TY-C10 release plate black
1x Transport case

Shoulderless: With a reverse leg fold-up, easily backpack the 12.4 inches/315mm compact fit and carry less at a weight approximate to 1.58lbs/0.72kg(without head).

Multiple Working Height: Remove the center column for low angle and macro shots. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights.

Easy Leg Adjustments: Adjust the legs to your desired angle by pulling out the semi-automatic leg angle adjustment button. Easily set up the legs with a quick turn twist of the leg locks.

Shoot Beyond Your View: Smoothly pan the head 360° to capture a beautiful landscape panorama shot.
SIRUI Compact Traveler Tripod 5CX
MATERIAL: CARBON FIBER
Sections: 5
Max. Tube Diameter(mm/inch): 22/0.87
Min. Tube Diameter(mm/inch): 10/0.39
Min. Height(mm/inch): 90/3.54
Max. Height(mm/inch): 1320/51.97
Retracted Height(mm/inch): 535/21.1
Folded Height(mm/inch): 315/12.4
Weight(kg/lbs): 0.85/1.87
Max. Load(kg/lbs): 4/8.8
Ball Head Specification:
Diameter(mm/inch): 29/1.15
Height(mm/inch): 70/2.76
Weight(kg/lbs): 0.21/0.45
Max. Load(kg/lbs): 10/22

Brand Sirui
Color Black
Compatible Devices Camcorder, Cellphone, Camera
Special Feature Full-size, Compact, Adjustable-panning
Material Carbon Fiber
Weight Limit 6.61 Pounds
Maximum Height 62.6 Inches
Tripod Head Type Fluid Heads
Minimum Height 17.72 Inches
Number of leg sections 4
Carbon Fiber Construction - High quality carbon fiber video tripod, lightweight and sturdy. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 3kg/6.61lb. Tripod weighs only 2.8lbs/1.27kg (Without video head).
Adjustable and Extendable - 4 section Carbon Fiber legs with quick release twist-locks allow you to adjust the working height from 17.7" to 62.6" in seconds, while with a folded height of 18.5". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions.
2-in-1 Video Tripod and Monopod - 2 in 1 video camera tripod, it's functional design allows it to be used in video tripod, monopod or alpenstock mode to make your photography more diverse, you can converted into a full size monopod by screwing together the center column and the removable tripod leg. Its invertible central column also allows for super low shots and great Macro control.
VA-5 Ultra-Compact Fluid Video Head - The VA-5 Fluid Video Head weighing in at 1.3 lbs while holding up to 6.6 lbs. The VA-5 fluid head utilizes two bubble levels – one on the base of the head for tripod alignment and one on the top for camera alignment. An internal spring-assisted counter-balance provides for smooth 360° pans and +90°/-70° tilts.
Easy to Carry - Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 18.5" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel.

Step Up Lens Filter Adapter Rings - Set of 9 - Allows You to Fit Larger Size Lens Filters on a Lens with a Smaller Diameter - Sizes: 37-49, 49-52, 52-55, 55-58, 58-62, 62-67, 67-72, 72-77, 77-82 mm
When you buy a new lens with a different diameter, you don't want to buy another set of filters for it.
This set of Lens Filter Adapter Rings allow you to fit a larger size lens filter onto a lens with a smaller diameter.
Step up to a maximum of 9 sizes from 37 mm to 82 mm. Adapter rings included in this package: 37-49 mm, 49-52 mm, 52-55 mm, 55-58 mm, 58-62 mm, 62-67 mm, 67-72 mm, 72-77 mm and 77-82 mm.
Each Lens Filter Adapter Ring is made of durable anodized aluminum. They will last much longer than plastic adapter rings.
Other CamKix accessories are available to protect, clean or enhance the pictures/video footage of your phone, DSLR, drone or action camera.

FUJIFILM INSTANT COLOR FILM instax square is an ISO 800 credit-card-size integral daylight color film designed for use with Fujifilm instax square cameras. This glossy film yields superb results under both daylight and electronic flash conditions. This package contains one casette loaded with 10 sheets of color film with a white border. It is intended to be used with Fujifilm Instax Square type of cameras.

Features:

Develops in approx. 90 seconds – Capture the moment and watch the photo develop in front of your eyes!

Hi-Speed ISO 800 – With superb grain quality, INSTAX Film ensures vibrant colors and natural skin tones

INSTAX SQUARE film print Size: 86mm x 72mm (3.39” x 2.83”), Image size: 62mm x 62mm (2.44” x 2.44”)

The square sized film is easy to carry in your bag or wallet. Leave them blank or personalize with a fun message.

Easy-to-Load Cartridge – Each film cartridge is designed and labeled for easy loading and filled with film for 10 credit-card sized instant photos.

Highly Stable – The film emulsion performs at temperatures as low as 5 C and as high as 40 C.

For use in all INSTAX SQUARE Instant Cameras and INSTAX SQUARE Smartphone printers.

Key Features
Adjustable Short Edge for Custom Fit
Arca-Type Dovetail on Each Axes
Stainless Steel 1/4"-20 Camera Screw
Allen Wrench with Magnetic Storage
Rubberized Padded Camera Platform
Aircraft Grade Aluminum Construction
Mortise and Tenon Assembly for Strength
The NLP-C Adjustable L-Bracket from NiSi is an Arca-type compatible universal adjustable L-bracket that is compatible with select Canon, FUJIFILM, Nikon, and Sony camera bodies. It allows rapid switching of the orientation between landscape and portrait without making any changes on the tripod or tripod head. Both the vertical and horizontal components feature the dovetail design that will work with a wide range of Arca-type compatible heads and clamps. The smaller, vertical component can be adjusted forwards or backwards to better accommodate the connection ports of a camera. The camera platform has an extra-long mounting screw slot that allows cameras to move horizontally to make extra room for cables and to allow full access to the camera battery door. It also features a large rubber base to reduce camera movement and twisting while protecting the camera's finish and includes a stainless steel 1/4"-20 mounting screw.

This L-bracket is made of aircraft-grade aluminum for strength and durability, and the components assemble with a mortise-and-tenon joint for stable strength. The included magnetic wrench stores in the base of the bracket, always handy to rapidly install or remove the bracket. It features three 1/4"-20 accessory mounting socket for attaching microphones, compact LED lights or other accessories.

Features At a Glance
Better weight distribution and balance through the tripod
Maintain composition when changing from horizontal to vertical orientation
Great for panoramic shots in both vertical and horizontal orientation
Allows for a full range of motion in portrait or vertical orientation when using a ball-head
Maintain access to the accessory ports on your camera
Can be quickly disassembled to fit in a camera bag or pocket
Acts as a protective shell around the camera body
Compatible Cameras
CANON:
EOS M6
EOS 6D
EOS 5D Mark IV
EOS 5D Mark III
EOS 5D Mark II
EOS 5Ds
EOS 5Dsr
Rebel XT1 / 400D

FUJIFILM:
GFX 100S
GFX 50R
GFX 50S II
GFX 50 S
X-T30 II
X-Pro3
X-T3

NIKON:
Df
D750
D780
D850
D810
D810A
D800
D610
D500
D7500
D7200
D5600
D5300
D3500

SONY:
a7
a7R

Key Features
For Quick Portrait to Landscape Rotation
Provides a More Stable Center of Gravity
Reposition Without Removing from Tripod
Haptic Rotation Angle Indicators
Arca-Type Compatible, with 1/4"-20 Mount
Compatible with Articulating LCD Screens
Lens Ring Inner Diameter: 72mm
Aircraft-Grade Aluminum Construction
Inside Rubber Ring Protects Lens Finish
Large, Knurled Locking Knob
The Wizard W-73 Camera Positioning Bracket from NiSi is a rotating collar that attaches to select mirroless camera bodies, allowing the camera and lens to easily rotate between portrait and landscape orientation without having to remove them from the tripod head. This feature is particularly useful for landscape photographers, real estate photographers, and studio portrait photographers who need to quickly change their camera's orientation.

Unlike traditional L-brackets, the Wizard W-73 is designed to work seamlessly with cameras that have fully articulating screens, allowing the screen to be positioned without any compromise. When positioned at 180 degrees, it can also be used for low-angle or macro shooting. The Wizard W-73 features tactile, haptic indicators at 0-, 90-, and 180-degrees to ensure that camera alignment is always maintained. A large, knurled locking knob makes it easy to secure the camera in position. Additionally, the camera is mounted with the sensor positioned in the center of the lens ring, ensuring that the center point of the image is always maintained. The Wizard W-73 features a rubber ring on the inside to ensure the finish of lens barrels are always protected. The outer diameter of the lens mount must be smaller than the inner diameter of the lens ring, lenses with an outer mount diameter larger than 72mm cannot be mounted. To check lens compatibility, measure around the lens near the lens mount to ensure it's less than 72mm.

The Wizard W-73 is constructed from aircraft-grade aluminum alloy, making it both rugged and lightweight. The mounting foot is Arca-Swiss compatible, providing wide-range compatibility with most tripod heads and clamps. It also features a 1/4"-20 thread mount so any quick release plate can be attached, making it compatible with almost every tripod. The base of the camera mounting plate stores a magnetically mounted Allen wrench for securely attaching the 1/4"-20 screw to the camera body.

Compatibility
Nikon:
Z7 II
Z7
Z6 II
Z6
Z5

FUJIFILM
X-H2S
X-T5
X-T4
X-T3
X-T2
X-H1

Panasonic
S5

Leica
SL 2
SL

Olympus / OM System
EM1
OM1
EM5 III
EM5 II
Operational Restrictions
When working with a long lens that exceeds 200mm or weighs more than 2 pounds, it is advisable to use the original tripod collar that comes with that lens.
Any switch or button on the side of a lens within 2cm of camera may be covered by the lens ring.
Cameras with accessory battery grips or built-in battery grips are NOT compatible.
Not compatible with medium-format camera bodies.

Key Features
For Beginning Landscapes and Seascapes
V7 100mm Filter Holder
True Color Circular Polarizing Filter
1x 100 x 100mm ND Filter
1x 100 x 150mm Graduated ND Filter
Compatible with Wide Angle Lenses
67mm, 72, 77mm, and 82mm Adapter Rings
Air Blower, Dust Brush, & Cleaning Cloth
82mm Lens Cap
Caddy Filter Pouch
This 100mm V7 Starter Kit from NiSi features the V7 100mm Filter Holder, with a capacity of up to three 100mm-wide, 2mm-thick rectangular filters. It includes a true color Circular Polarizing Filter, which is designed to reduce glare and reflections from non-metallic surfaces, increase saturation and vibrancy in the sky and foliage while ensuring true color reproduction is at its best by eliminating the warming effect that many polarizers may create.

This kit contains a neutral density filter, a medium-edge graduated neutral density filter, which can be used individually or together for greater control over shutter speed and aperture settings. Separately available additional filters can be added when desired.

This kit includes adapter rings making it compatible with most lenses, additional adapter rings are available separately. When working with lenses as wide a full-frame equivalent 16mm, the slim aluminum frame of the V7 will not vignette. In addition, an air blower, dust brush, and microfiber cleaning cloth help to keep the filters clean, in studio or on location. The included Caddy Filter Pouch stores the complete kit for storage or transport.

Key Features
Adds Soft Mist to Entire Image
Softens Skin Tones and Reduces Blemishes
Creates a Dreamlike Atmosphere
1x Filter Factor / 0-Stop
Aluminum Filter Ring
The Allure Soft White Filter from NiSi diffuses and softens strong light entering the lens and produces a diffused glowing effect. This filter fits lenses with a 67mm filter thread, and it renders a soft, ethereal image with little loss of clarity or detail. This filter works by diffusing the light entering the lens with small particles; by spreading the light more evenly, a soft glow is created rather than the sharp, well-defined image when shooting without a filter. The soft effect makes this filter well suited for portrait photography, as it softens skin texture and reduces the appearance of blemishes on the face or skin. It is also useful when shooting cityscapes and in landscape photography, adding glowing effects to strong light and creating a dreamlike atmosphere.

Features the new NiSi V7 Holder
Includes the new True Color CPL and adaptors for 67mm, 72, 77mm and 82mm
The holder allows the use of 3 square filters + 1 circular polarizer
No vignetting at 16mm (Full Frame)
Includes four filters: 100x100mm IR ND64 6 Stop ND, 100x100mm IR ND1000 10 Stop ND, 100x150mm IR GND8 Reverse 3 Stop and 100x150mm IR GND8 Medium 3 Stop
Includes the NiSi Caddy Pouch, Lens Cap, Clever Cleaner, Cleaning Cloth, and Blower
Great value starter kit for getting started with ND filters and landscape photography
The NiSi 100mm V7 Advance Kit is the ultimate kit for landscape and seascape photographers with everything you need to get started. It’s perfect for anyone who wants to create long exposure images and use ND filters/GND filters with multiple lenses up to 82mm with a standard filter thread. The kit includes the most popular adaptor rings (67mm, 72mm, 77mm and 82mm) with others sold separately. The NiSi 100mm V7 Advance Kit represents a great saving compared to buying all the included items separately.

Key Features
1/4 Diffusion Filter
Reduces Highlights and Lowers Contrast
Creates Cinematic Look
Softens Wrinkles and Blemishes
Nano Resistance Coating
Optical Glass
Brass Filter Ring
The Black Mist Filter 1/4 from NiSi is a classic style diffusion filter for lenses with a 72mm filter thread. Inspired by the popular cinema range "Allure Mist Black" and recreated as a circular filter. Compatible with both still imaging or video, a Black Mist filter lowers contrast by suppressing and diffusing highlights and lifting shadows to help balance the tonal range of the image. It creates a cinematic look and is also commonly used to soften wrinkles, blemishes and creates a flattering image of a subject. The effect is most effective when capturing light that diffuses softly when backlit, creating a transparent light that looks like it was taken with a high-quality vintage lens.

This filter is constructed from optical glass and is available in diffusion grades of 1/8, 1/4, and 1/2; the diffusion effect becomes approximately twice as strong with each grade number increase.

Each optical glass surface features NiSi's Nano coating for an improved beading effect when in contact with water, oil, or grease for greater cleaning efficiency. Constructed with a high-quality brass frame for enhanced durability and jamming prevention.

Reduces highlights and lowers contrast
Creates a cinematic look
Softens wrinkles and blemishes
Delicately captures flare
Creates a soft, pastel-like quality
Softly diffuses light
Resolution maintained while contrast and sharpness are understated
High-quality brass frame
Nano resistance coating repels water, oil, and grease

Key Features
1/4 Diffusion Filter
Reduces Highlights and Lowers Contrast
Creates Cinematic Look
Softens Wrinkles and Blemishes
Nano Resistance Coating
Optical Glass
Brass Filter Ring
The Black Mist Filter 1/4 from NiSi is a classic style diffusion filter for lenses with a 72mm filter thread. Inspired by the popular cinema range "Allure Mist Black" and recreated as a circular filter. Compatible with both still imaging or video, a Black Mist filter lowers contrast by suppressing and diffusing highlights and lifting shadows to help balance the tonal range of the image. It creates a cinematic look and is also commonly used to soften wrinkles, blemishes and creates a flattering image of a subject. The effect is most effective when capturing light that diffuses softly when backlit, creating a transparent light that looks like it was taken with a high-quality vintage lens.

This filter is constructed from optical glass and is available in diffusion grades of 1/8, 1/4, and 1/2; the diffusion effect becomes approximately twice as strong with each grade number increase.

Each optical glass surface features NiSi's Nano coating for an improved beading effect when in contact with water, oil, or grease for greater cleaning efficiency. Constructed with a high-quality brass frame for enhanced durability and jamming prevention.

Reduces highlights and lowers contrast
Creates a cinematic look
Softens wrinkles and blemishes
Delicately captures flare
Creates a soft, pastel-like quality
Softly diffuses light
Resolution maintained while contrast and sharpness are understated
High-quality brass frame
Nano resistance coating repels water, oil, and grease